Grab the spout with a pipe wrench and turn it counterclockwise until the spout comes off. Once the spout is off, take out the rubber washer and replace it. Oftentimes, this is enough to fix the problem. If not you will need to stop by a hardware store and get an entirely new shower diverter valve.
Why does tub spout leak when shower is on?
If your bathtub faucet spout is leaking when the shower is on, it means that the shower diverter valve is no longer sealing due to a worn out washer or minerals deposits. While repairs are possible, the best thing would be to replace the bathtub spout or the shower diverter valve.
How do I stop water from coming out of my shower spout?
Quote from the video:
Quote from Youtube video: So i'm going to try to get that off and really what we're trying to do is hopefully you can see down in there you can see the little plate that's popped up that would let water come through the tub
Why is my shower diverter leaking?
If, after you trigger your shower diverter, water continues to leak out of the bathtub spout rather than the showerhead, the shower diverter is not working properly. This could mean that the inner rubber stopper isn’t creating a good seal to fully block and redirect the flow of water, or it could be another problem.
Can a tub spout cause a leak?
Home problems like leaking tub spouts can lead to stains over the area and it can also waste some precious amount of water with constant usage.
How much does it cost to replace a shower diverter valve?
Cost to replace shower diverter valve
Replacing a shower diverter valve costs $225 to $575, including materials and labor. A shower diverter valve switches the flow of water between the bathtub spout or shower head and is typically controlled by a small handle located on the center trim plate or near the tub spout.
How do I know if my shower diverter valve is bad?
First, if the valve is engaged but water continues to come out of the tub spout only, the gate is severely damaged or has fallen out completely. Second, if the valve is engaged but the showerhead experiences low water pressure and water continues to drip from the spout, the gasket has failed or is starting to fail.
What does a shower diverter look like?
Quote from the video:
Quote from Youtube video: Comes in from the left cold. Water from the right the two are mixed in the valve. And will either go up to the showerhead or down to a tub spout a diverter directs which way the water goes.
Where is the shower diverter valve?
This diverter valve, also known as a tee diverter, is located on the end of the tub spout (see photo above). Activating it requires simply pulling up on the diverter, which then sends water to the showerhead. Pushing the diverter back to the downward position restores water flow to the tub again.
How do you seal a tub spout?
If you have a thread-style spout, apply thread sealant to the pipe threads. Then apply a small amount of caulk to the back of the spout where it will meet the wall and slide the spout onto the pipe, tightening it by hand until it is snug against the wall and level to the bottom of the bathtub.
How much does it cost to fix a leaky bathtub faucet?
Written by HomeAdvisor. It costs an average of $350 to replace or repair a bathtub faucet, with a typical range of $300 to $400. However, it may cost you as much as $1,000 to replace a faucet entirely or as little as $25 to do a simple repair.
How much will a plumber charge to fix a leaky faucet?
Dripping Faucet Repair Costs
A plumber’s typical rate is $50 to $150 per hour. A faucet repair is usually a quick job for a pro and shouldn’t take more than an hour. Most plumbers charge a minimum of a 1-hour visit for labor.
How much does it cost to replace a tub shower valve?
Replacing a shower valve is a relatively simple job. According to data from Porch, you can expect to pay around $310 for a valve and stem replacement, or slightly more if you replace the whole unit.
