Yes, you can replace fluorescent tubes with LED tubes or LED-integrated fixtures. If you just want to replace the bulbs, you can use plug-and-play, direct-wire, or hybrid LED tubes. Plug-and-play tubes are the easiest to install as they do not require any rewiring to the fixture.
Can you put LED bulbs in old fluorescent fixtures?
You have fluorescent tube lights in your home or business already, and you’re wondering if you can pop LED tubes in these fixtures or if you’ll need to change out the fixtures for something designed for LED. Good news! You can use LED tubes in your existing fixtures!
Are LED and fluorescent lights interchangeable?
Many LED tubes are “plug and play”, meaning you can just install them like you would a fluorescent bulb. For this to be true, look for bulbs that are “ballast-compatible” meaning that they can use the ballast already installed in your fluorescent fixture to power the LEDs.
How much does it cost to convert fluorescent to LED?
Fluorescent to LED Conversion Kits
On average, an electrician charges $50-$100 an hour. Once the value of the electrician is added to the value of the LED conversion kit and LED bulb, the cost can be a bit high with an all-around amount of about $160-$506.
How do I replace 4ft fluorescent with LED?
When you install those you'll want to make sure that those are at the northernmost point in the fixture so the LEDs by direction they'll be pointing. Down.
Can I use a T8 LED tube in a T8 fluorescent fixture?
Type A – LED tube has an Integrated Driver for use on Existing Fluorescent Ballast. Type A LED tubes need an existing T8 electronic ballast to operate. If you have T8 electronic ballasts this makes installation very easy. All you need to do is remove the existing T8 fluorescent lamp and install a new T8 LED Type A lamp …
Are LED lights brighter than fluorescent?
The LED tube lights are noticeably brighter than fluorescent tubes and you don’t get exposed to any kind of harmful rays such as UV/IV rays as well that can damage your eyes and can result in skin allergies as well.
Can you mix LED and fluorescent tubes?
Yes, and there are advantages in mixing them. The LEDs comes on instantly, whereas the CFLs can take longer, so a mixture is faster acting than only CFLs. Even though CFLs don’t come up to full brightness instantly, their slow speed is much less noticeable with an LED or two in the mix.
Why do LED bulbs not work in some lamps?
There might be a couple of reasons why sometimes you cannot simply put LEDs in any old fixture. As mentioned previously, if an existing fixture has a dimming feature, and your new LEDs are not compatible. You will run into trouble with dimming capability, such as flickering or strobing or incomplete dimming.
How do I convert fluorescent tubes to LED?
Quote from the video:
You'll want to unscrew. The wire nuts on the black and the white wires. Now at this point you have a decision to make you can work with the fixture on the ceiling.
Are T8 and T12 interchangeable?
T8 tubes are simply 1 inch in diameter versus the 1.5 inch diameter of T12 tubes. In an effort to make LED tube lights compatible with the internal dimensions of most fixtures, you will find that most LED tube lights feature a T8 or 1 inch diameter. They can indeed be used in T12 fixtures.
What happens if you put a T8 bulb in a T12 fixture?
The main difference between T8 and T12 tubes is the tube’s diameter. T12 tubes are 1.5″ in diameter while T8s are just one inch. All other things—socket sizes, lengths, distance between pins—are the same. T8 LED tubes won’t fall out if you try to install them in a T12 fixture—they’ll fit just fine.
Are T12 fluorescent bulbs being phased out?
In effect since July 2012, the legislation eliminates nearly all 4-foot T12 lamps, some 4-foot T8 lamps, most 8-foot T12 lamps, and almost all standard halogen PAR38, PAR30 and PAR20 lamps from the market. T12 technology is over 80 years old. Since that time, lamps and bulbs have been developed that just work better.
How do I know if my fixture is T8 or T12?
If no markings are available, the size in diameter of the tube is the easiest way to determine the type you have installed. T8 tubes are 1-inch in diameter and T12 tubes are 1 1/2 -inch.
Can you replace 8 foot fluorescent bulb with LED?
There is a wide variety of methods for converting to LED tubes. The simplest is to completely replace old fluorescent fixtures with brand-new LED fixtures. However, LED fixtures to replace four-bulb (8-foot-long) fluorescent fixtures (common in farm buildings) can set you back $100 or more per unit.
Can I replace 48 inch fluorescent bulbs with LED?
Yes, you can replace fluorescent tubes with LED tubes or LED-integrated fixtures. If you just want to replace the bulbs, you can use plug-and-play, direct-wire, or hybrid LED tubes. Plug-and-play tubes are the easiest to install as they do not require any rewiring to the fixture.
