Can you put a timer on a dimmer switch?

Yes, the dimmer would just be added in series with the timer. Normally, a timer controller goes on the feed to the circuit for outside lights without any other switches.

Can you put a timer on a light switch?





In-wall timers can turn a standard wall light switch into a programmable timer complete with 7-day customization, random vacation settings, and a backup battery.

Can you put a timer on a double light switch?

These are super simple to install: just remove the existing switch and connect the timer to the two wires that used to be connected to the switch. Of course, you can use a two-wire timer even if you have four wires available. If you are intimidated by electrical wiring, this is the way to go.

Do you need a dimmer on both sides of a 3 way switch?

If you’re replacing two 3-way light switches at the top and bottom of a stairwell or at either end of a hallway, you might think you need two 3-way dimmer switches, but you actually only need one. When using a 3-way dimmer switch, you should only have one dimmer on the circuit.

How do you wire a light switch to a timer?

Quote from the video:
Quote from Youtube video: Right part of the light switch that is labeled. Load. All right so now we can take the line wire which we put a piece of tape on to designate it and we're going to put it down here in the bottom.

How do you wire a digital timer?





Quote from the video:
Quote from Youtube video: Attach the jumper wire and the neutral from the power source to terminal. 2 connect one load wire to terminal. 4. Complete the installation by securing the second load wire to terminal.

Are light timers a fire hazard?

A timer is not likely to cause a fire in a home than any other electrical device. There is no logic to a timer. Cristmas decoration fires are usually caused by overloading circuits, worn cords and damaged equipment.

Do LED lights work with timers?

Do LED Lights Work with Timers? Timers are fully compatible with energy-saving bulbs and LEDs.

Do timers use a lot of electricity?

A mechanical timer consumes about 1 Watt per hour. That means 24 Watt per day. A digital timer usually consumes a little bit more power. Here, the power consumption is about 2 Watt per hour.

Can you have 2 dimmers on the same circuit?



You can only have one dimmer per group. You can put the dimmer at either location, but not both locations. There are “companion” dimmers available from some companies, that allow you to place additional dimmers in the circuit.

What is a companion dimmer switch?

The Maestro companion dimmer switch is designed to compliment a Maestro switch or a 6A or 8A Maestro wireless multi-location switch. The easy-to-operate tap switch turns lights on and off to your favorite light level or tap twice for full on. Press, hold and release the switch for delayed fade-to-off.

Can you have 2 dimmers on a 2 way switch?

Two way dimming allows you to dim a light fixture from two locations. You can’t use ordinary rotary dimmer switches to do this because you could potentially dim the light down to 10% with one dimmer, then walk over to the other dimmer and attempt to dim the light to below 0%.

Do I need a neutral wire for timer switch?



Many electrical timers require a neutral so that the switch can be powered without sending power to the load. If you do not have a neutral at the switch box it means that the power source (line) does not come into that box and you are just switching the hot from another source.

Can I put a timer on a 3 way switch?

Quote from the video:
Quote from Youtube video: Support team in this video I'll be demonstrating how to install an ST is 0-1 C timer and a 3 Way application. Before we get started there's a couple things I wanted to cover.

How do you wire a 12 volt timer switch?

Quote from the video:
Quote from Youtube video: Right over here to the lead of the 12 volts. We have the negative of the going to the battery. So this is the gray wire is the negative you'll see the gray wire goes in here.

Do they make a 12 volt timer?

12 Volt Timer Switch DC Programmable 7 Day Digital 12v Timer Relay with Built-in Battery DC HOUSE.

How do you set a timer for outdoor lights?



Outdoor outlet timers, both mechanical and photoelectric are very simple to install. All you do is plug them into the wall outlet, then you plug your lights into the timer. You can easily change the settings of these types of timers with mechanical knobs and/or push buttons.

How does a light timer work?

A light timer is an electrical circuit with a built-in clock. Acting as a communicator between the power source and the light, the timer turns lights on and off based on the times you set. Available in a variety of sizes, these devices come equipped with controls ranging from circular dials to digital settings.

Which is the best timer switch?

Best Light Switch Timers Reviews

  • BN-LINK Programmable In-Wall Timer Switch. …
  • VIVOSUN Programmable Digital Timer Switch. …
  • Leviton Programmable Timer. …
  • Enerlites Programmable Timer Switch. …
  • DEWENWILS Programmable Light Timer Switch. …
  • JVR 12V Timer Switch Programmable Digital. …
  • Honeywell Programmable Light Switch Timer.


Why is my light timer not working?



If the timer doesn’t activate the connected light, it might be working but the light bulb in the fixture might be burned out. Get on a sturdy ladder and twist the bulb fully into the socket. Turn the light on manually via the switch timer. If the light still fails to turn on, the light bulb might be burned out.