This structure creates a high weight capacity. Depending on the length, a wall framed with 2x4s spaced 16 inches apart can handle 10,000 to 20,000 pounds of weight, more than enough to keep a house standing upright.

What is the load bearing capacity of a 2×4?

In general, a 2×4 can hold a horizontal load of around 20 to 40 pounds per linear foot if the weight is evenly distributed. If the weight is centered between the span, that number could drop to 20 pounds total or less for longer 2x4s.

How far can a 2×4 span without support?





While it can vary greatly from one piece of lumber to the next, generally, how far can a 2×4 span without support? Depending on various factors, a 2×4 floor or deck joist can span a maximum of 6′ 7” at 16” spacing or 7’11” at 12” spacing.

What size lumber do you need to span 16 feet?

For a 16 foot span, you will need atleast 3-2×14 or 6×14 size of wood beam. Thus, a 3 nailed 2×14 or 3-2×14 or 6×14 wood beam can allow to span 16 feet. For a 16-foot spans, the wood beam has to be at least 14 inches in depth and 6″ in width (3-2×14) used for residential building, wood frame structure or projects.

Can you use 2×4 as joist?

The short answer is yes. 2x4s can work for deck joists. However, they aren’t ideal for spanning long distances without bending or breaking, so you have some limitations. Choosing 2x4s for a low-sitting deck is perfect for keeping your feet out of the mud.

What is maximum span for 2×4 joist?

A 2×4 can span a maximum of 6′ 7” when spaced 16” apart and used as a floor or deck joist. When used as a ceiling joist or a roof rafter, a 2×4 can span up to 7′ 3” spaced at 16”, and 6′ 4” when spaced 24” apart. Due to the small spans of 2x4s, they often are not used in horizontal load-bearing capacities.

Are 2×4 strong enough for shed floor?





If building on a foundation other than a treated wood frame, you will need to acquire 6 units of 8ft long pressure-treated 2x4s to put under the shed for floor joists, and shorten them to 7′ 6.5”.

How far can a 2×4 deck joist span?

2×4 Deck Joist Can Only Span 5’8″ (1.72m) Between Supports. Either you are limited to a small deck, less than 6′ (1.8m), or you will need a mid-span beam. You can sneak out a few more inches if you set the 2×4’s at 12″ (300mm) on centre, but commonly deck joists are 16″ (400mm) o.c.

Can a 2×6 span 16 feet?

2-grade 2×6 joists can span up to 10 feet 9 inches from beam to beam when spaced the standard 16 inches apart with a maximum live load of 30 inches per square foot. In comparison, No. -1 grade lumber can span slightly further to 10 feet 11 inches under the same parameters.

Can a 2×10 span 16 feet?

How Far Can a 2×10 Span Without Support? An SYP (Southern Yellow Pine) 2×10 lumber span can reach up to 14′ when used as a joist with 16” spacing. If using SPF or Redwood lumber, then the span maximum for the same distances will be half to a full foot less.

Can a 2×12 span 16 feet?



A 2×12 (2-by-12) floor joists can span up to 23 feet 3 inches, 2×10 (2-by-10) up to 19 feet 1 inches, 2×8 (2-by-8) up to 15 feet & 2×6 (2-by-6) up to 11 feet 4 inches at 16″ spaced by using southern yellow pine graded as #1 when live load of 30 lbs/ft^2 & dead load of 10 lbs/ ft^2.

Can a 2×8 span 16 feet?

Span is determined by species, grade, dimensions, spacing, use, and load. A rule of thumb is 1.5 times a joist’s depth but in feet when spaced at 16” centers. In general, a 2×8 will span 1.5 x 8, so 12-feet. Based on all factors though, a 2×8 joist span is 7′-1” to 16′-6”, and a rafter 6′-7” and 23′-9”.

What size beam do I need to span 15 feet?

Thus, for a 15 foot span, you will need atleast 3-2×12 or 6×12 size of wood beam. For a 15-foot spans, the wood beam has to be at least 12 inches in depth and 6″ in width (3-2×12) used for residential building, wood frame structure or projects.

What size lumber can span 20 feet?



For a 20 foot span, you will need atleast 2×12 size of lumber/ floor joist when spaced at 16″ apart. Thus, a 2×12 size of lumber can allow to span 20 feet. For a 20-foot spans, the lumber has to be at least 12 inches in depth used as floor joist.