How do you fix a Moen kitchen faucet that won’t swivel?
Solution
- Remove the spout and lubricate the spout o-rings with silicone-based grease (Moen part number 99915). Do not use plumber’s grade faucet grease, silicon sprays or any lubricant that may contain petroleum. …
- Replace the o-rings inside of the spout. …
- Inspect the retainer nut on top of the spout (if applicable).
What is the cause of the problem if the handle on a faucet rotates without changing the flow of water?
It’s usually a result of wear and tear on the faucet stem, or cartridge. The cartridge attaches to the handle and the two components work together to control the water flow. When the stem becomes stripped, the handle will feel loose or just spin on end.
How do you fix a faucet that spins?
Spinning faucet handles can be caused by general wear and tear on the faucet stem, otherwise known as the faucet cartridge. This part can be replaced by removing the faucet from the sink and inserting the new cartridge.
How do you fix a stuck swivel faucet?
Quote from the video:
Quote from Youtube video: It takes a 1 8 allen wrench to unscrew that. You don't have to take the screw the whole way out just loosen it the handle comes. Off. Then this ring should unscrew should come off by. Hand.
Why does my kitchen faucet not swivel?
The spout sleeve slides over an upper and lower o-ring to prevent leakage, and these o-rings become the bearings on which the spout swivels. When the spout assembly is too tight or the o-rings become gummed up, the spout will no longer swivel easily.
How do you lubricate a Moen faucet cartridge?
For one-handle faucets with a 1225 cartridge, simply remove the cartridge and lubricate it both inside and out with a silicone-based grease (Moen part number 99915). Do not use plumber’s grade faucet grease, silicon sprays or any lubricant that may contain petroleum.
Why does my faucet stop running?
Clogged pipes are usually due to sediment build-up, which stops the flow of water. This build-up may be from limescale, rust, debris or heavy metal deposits. If you suspect that your pipes are blocked, you should call your plumber.
How do you change a faucet cartridge?
Quote from the video:
Quote from Youtube video: Use a crescent wrench to remove the bonnet nut from the cartridge. Once the nut is off remove the cartridge if you need extra leverage. Use the pliers to pull on the stem.
Why does my faucet continue to run after I turn it off?
If the water still runs after shut off, it’s most likely because of a problem with the seal. This occurs from issues with the hardware inside the faucet. There 3 common reasons why a faucet will leak. A gasket or washer needs to be replaced.
How do I free a stuck faucet?
Use the wire brush to scrape away as much of the corrosion as possible. Once you’ve cleared it off, use the wrench to see if you can turn the part that’s stuck. Use the hairdryer to heat up the corroded area if it’s still suck. The heat may be able to break or loosen the bonds as the metal swells.
How do you fix a Moen kitchen faucet?
Quote from the video:
Quote from Youtube video: For this cartridge they based the replacement parts off in description and Moen has a lifetime free replacement for their faucets. So if a supplier is going to charge you for a new cartridge.
How do you fix a stiff neck faucet?
Quote from the video:
Quote from Youtube video: Okay so first thing first let's go underneath the sink. And turn off those two shutoffs the hot and cold water for the faucet. Okay so let's turn on the water see what happens a quick trip.
How do you fix a Moen faucet?
Quote from the video:
Quote from Youtube video: If you look at your new one there's a little tab right there that goes to that slot right there so just line those two up and push it in put your brass ring back on tighten. It with pliers.
How do you fix a sticky Moen faucet?
Quote from the video:
Quote from Youtube video: The inside of the spout. Lubricate the o-ring at the bottom of the faucet. Body. Slide the hose into the spout and push it down over the valve body until it is seated firmly.
How do you take apart a Moen kitchen faucet head?
Quote from the video:
Quote from Youtube video: Counterclockwise. When the connector is undone I'll place the rubber o-ring onto the counter. So I don't lose it then I'll take some duct tape and secure the pullout hose to the spout.
How do you take apart a single handle Moen kitchen faucet?
Some Moen faucets have handles that remove by loosening the screw in the back of the handle. To loosen this screw use a 3/32″ hex wrench. After the handle has been removed unscrew the spout collar nut by turning counterclockwise then lift and rotate the spout.
How do you clean a Moen faucet head?
Use the clothespin or clamp to prevent the hose from retracting into the faucet. Submerge the spray head in white vinegar. Allow it to soak for a few hours, but preferably overnight. After the spray head has soaked for a while, rinse it clean with warm water.
How do I know what model Moen faucet I have?
Exact model numbers can be found on your box or on your instruction sheet. If unavailable, you may find the general family series number on the back of the spout (non pullout).
Is Moen guaranteed for life?
Moen products have been manufactured under the highest standards of quality and workmanship. Most Moen faucets are backed by Moen’s Lifetime Limited warranty.
Does Moen replace parts for free?
If this faucet should ever develop a leak or drip during the Warranty Period, Moen will FREE OF CHARGE provide the parts necessary to put the faucet back in good working condition and will replace FREE OF CHARGE any part or finish that proves defective in material and manufacturing workmanship, under normal …
