How do you anchor a pull up bar to a brick wall?

Use an appropriately sized masonry bit and hammerdrill with light force. Anchor the bar to the lumber using 7/16″ x 1-1/2″ lag screws, or run 3/8″ carriage bolts through the lumber from behind before you mount it to the masonry. With this approach most of the torque load is applied to the lumber.

Can my wall support a pull up bar?





Mounting surface: Most wall-mounted pull-up bars can be mounted to any wall that has regularly spaced (16 or 24 inches) wooden studs, but some suggest you mount them specifically on brick or cement walls.

Can pull up bar be mounted on brick wall?

It is best that you only mount your pull up bars onto a solid brick wall as a lightweight wall can easily collapse. Besides that, see to it that the screws are positioned directly onto the bricks but not on the cement gaps between the bricks.

Can you mount a pull up bar on cinder blocks?

Concrete brick or block is a great surface for mounting your pull up bar. Whether its a wall or ceiling application you are generally more free to mount your chin up bar anywhere you want opposed to stud mounting where the studs dictate the location your bar will go.

What bolts for pull-up bar?

We usually recommend a 2″x4″, 2″ x 6″, 2″ x 8″, or 2″ x 10″ stringer depending on the application. Use 3/8″ x 5″ lag screws + washers to install the stringer into your studs. Use 1/2″ x 2″ lag screws + washers to install your pull-up rig, retractable squat rack, or pull-up bar into the stringer.

How do you install a concrete pull-up bar?





Quote from the video:
Quote from Youtube video: When it comes to concrete blocks and bricks but i've managed to install my pull-up bar. And it's very strong holds my entire body away and fully sturdy on the wall.

At what height pull-up bar should be fixed?

Addressing Headroom



Your head is about 1 foot high. Given room for additional motion, this means you should mount your chin-up bar a minimum of 18 inches below the ceiling where your head will be while performing pull-ups.

How much head clearance do you need for a pull-up bar?

Because the goal of a properly performed pull-up is not to barely get your chin over the bar. It’s to strongly pull your chest to the bar. This puts both your head and part of your shoulders over the bar. You’ll need 20” (50 cm) or more for that.

How do you anchor concrete blocks?

Drill a pilot hole at the proper location with a hammer drill and masonry bit to the depth your screw will penetrate. Tap the plastic anchor into the hole. It should fit snugly but drive in easily with a hammer. If the hole gets a bit large, use a bigger screw to push the plastic against the walls of the hole.

What type of anchors can be used in hollow concrete block?



Hammer Drive Anchor – is a light duty anchor that can be used in the solid section and the hollow section if enough base material is left after the drilling process is complete.

How do you anchor a concrete wall?

If you’re looking for the quickest way to fasten walls to concrete, powder-actuated fasteners ($199, The Home Depot) offer the most speed.



  1. Steel Track. …
  2. Hardened Concrete Nails. …
  3. Drill with Two Different Bits. …
  4. Masonry Screws. …
  5. Drop-In Anchors. …
  6. Lag Shields. …
  7. Hammer-Drive Anchor.


How do you hang something heavy on a concrete wall?



Shelving brackets and hooks that are constructed of strong steel mean little if the anchor which fastens them to the concrete wall is too weak to bear the weight. Installing strike anchors that expand inside the concrete is one of the best ways to secure heavy things on concrete walls.

Can you hang things on concrete walls?

If you want to hang something from a cement wall, try using adhesive hooks so you don’t have to put a hole in the wall. Choose a hook that’s rated to hold more than the weight of the object you are hanging.

How do you hang things on a concrete wall without drilling holes?

Hardwall hangers are picture hooks intended specifically for difficult surfaces like concrete block and brick walls. The plastic hook attaches to the wall with small metal nails that pound into the wall surface with a hammer.

Do Command hooks work on cement walls?

Command hooks and strips both work on concrete walls. Make sure you install each with care, though, to ensure their long-term usability. Hooks and strips also let you make your space more enjoyable to live in without permanently changing the space, saving your safety deposit as a result.

How do you stick something to concrete?



Mounting putty is a sticky, clay-like material that comes in sticks or cubes. It’s rolled into balls by hand and used as a substitute for pushpins or tacks. Mounting putty is especially good for cinder block walls because it is thick enough to fill in cinder block’s bumpy surface.