If the roof sags between the rafters or trusses, the most likely cause is sheathing that’s too thin for the area it covers. The fix here is to replace the thin sheathing with thicker, sturdier sheathing.

Why does it look like my roof is sagging?

Sagging roofs are typically caused by insufficient internal bracing or undersized rafters/trusses combined with excessive loads of weight. Snow, ice, wind, and even too many layers of shingles can add stress to your roof and cause sagging.

What causes dips in roof?





A leaky roof might cause the sheathing to rot and collapse, partially making the area to dip. In most cases, a roof dip due to a leak occurs near the dormer or the chimney. It is easy to identify collapsed sheathings from below. They tend to be dark and discolored and with mold growth.

Why is my flat roof sagging?

Sagging or low spots in a flat roof may be due to undersized or weakened roof joists or problems with the buildup layers beneath the exposed roofing. As mentioned, roofs sag because there’s too much weight, or load, for the existing structure. Common loads include: snow and ice.

Why does a roof bow?

Excessive weight load on a roof is one of the most common causes of sagging. Every roof will be designed to handle a certain weight and carry a certain load, if exceeded it can cause the roof to deflect that has a dipping or sagging effect to the appearance of the roof surface.

How do you fix a roof dip?

Quote from the video:
Quote from Youtube video: There's kind of drooping a little bit it's getting noticeable it's not really really bad but we're gonna fix this by putting in a knee wall. Along the strong backs on either side of the roof.

How do you reinforce a sagging roof?





To correct the sagging itself, angled braces can be installed to shore up the rafters. Another approach is to give more support to the walls by installing chains attached to the wall plates and linked in the middle with a turnbuckle.

What are soft spots on a roof?

Soft spots form when the layer underneath your roof gets doused. This often happens due to gaps in your roof’s shingles. If your roof has shingles, it likely has plywood sheeting underneath its tiles or shingles.

Why does my new roof look lumpy?

Asphalt shingles soften in the heat, which causes the shingles to bond to one another. This is what creates that flat look. If your shingles have not bonded yet, then they might look a little lumpy. However, this problem usually resolves itself after the shingles soften, usually in the warmer months.

What does a wavy roof indicate?

What Makes a Roof Go All Wavy? A wavy roof is rather alarming, and unfortunately there are actually quite a few potential causes. However that pronounced wave will nearly always signify one big thing: your roof is buckling or bulging somewhere, or the materials simply aren’t lying flat.

Is a sagging roof normal?



In terms of how much roof sag is acceptable, just about any sagging is bad. A roof should only sag if there is any weight on it. Even then, most roofs should be sturdy enough to handle the added weight without sagging, so sagging when weight is applied can point towards a potential problem in the near future.

How do you jack up a sagging roof ridge?

Quote from the video:
Quote from Youtube video: There's a good chance that the walls. Won't fix the SAG in the roof. If you just pull them in with a chain you're going to need to raise them as you go with some type of a jack in post. System like

How do you fix uneven roof rafters?

Quote from the video:
Quote from Youtube video: And actually opened up the roof and stuck a new joist all the way in back. Probably. About five feet and that took care of the sagging.