What do you do with copper wire in a ceiling fan?
Quote from the video:
Quote from Youtube video: White is a neutral wire and completes the electrical circuit green or copper is a ground wire and can keep a fixture from experiencing damaging power surges.
What is the bare copper wire in a ceiling fan?
The bare copper wire is the ground wire. If you have two toggle switches on the wall that operate the ceiling fan motor and light separately, you should have an additional red wire inside the box.
What do I do with the red wire when installing a ceiling fan?
A red wire up in the ceiling fan junction box usually indicates that the wiring has been installed which provides separate switch for the light and a separate switch for the fan motor. If your ceiling fan does not have a light fixture, then simply cap off the red wire and attach the fan motor to the black wire.
Does green wire go to copper wire?
The ground wire will be either green or bare copper wire. If the wire is covered with green insulation you will need to strip 1/2 inch of the green insulation off of the tip of the wire.
Can I connect blue and black wires together?
If you only have one switch, connect the black and blue wires. The black and blue wires need to be connected. You will be able to control your fan and lights with a single switch.
Why does my fan have two ground wires?
The reason why there are multiple grounds are because some metal parts are insulated from each other by a rubber or plastic parts. Ground wire screwed into the tube is grounding the metal tube. Ground wire running down the tube grounds the fan housing and motor. Ground wire on the mounting plate is grounding the plate.
When connecting a ceiling fan what is the wire?
Wiring Ceiling Fan and Light With One Switch
- Connect the green/copper wires together.
- Connect white wires together.
- Connect black wires together.
- Connect the lighting wire, typically blue, to the black fan wire and the black ceiling wire.
- Tuck the wires back into the box.
- Turn the power back on and test the fan.
Why are there two white wires and two black wires?
So, why are there two black and two white wires in your outlet box? There are two black and two white wires in an outlet box because the outlet is in the middle of a series circuit, accepting power from another source and sending it on. Two cables are hot wires, bringing the power in and carrying it onward to the next.
What wiring is needed for ceiling fan?
For most home ceiling fan wiring the electrical box should have either 14 or 12 gauge solid copper wire in it. 14 gauge wire is for 15 amp 120VAC circuits and 12 gauge wire is for 20 amp 120VAC circuits. The copper wires are sheathed in a cable (Romex Cable) and include a black, white and bare copper wire.
Can black and green wires go together?
The green wire does not connect to the black wire. The black wire is the live wire. It brings power from the breaker to the various devices in your home, which is why the wire is so dangerous. If you touch a bare black wire, it could kill you.
What color wires go together for a ceiling light?
One of the black and white wires goes to the light fixture. The other black and white wires are the electrical circuit for the switch. If the light can be turned on or off from switches at each side of the room, you’ll see a blue wire that connects the electrical circuits for three-way switches.
Where do I connect the green ground wire in ceiling fan?
Get Grounded
You will also have a ground on the fan side. This may be a green wire coming from the fan motor or located on the mounting bracket. Alternatively, it might be a green screw inside the mounting bracket. If there’s a green wire, connect it to the house’s copper ground wire with a wire nut.
Can I connect red and black wires together ceiling fan?
Connect the red wire in the ceiling to the black wire in the light kit and the black wire in the ceiling to the black wire in the fan. Tuck the wires back into the box. Turn the power back on and test the fan.
What happens if you do not connect the ground wire?
The appliance will operate normally without the ground wire because it is not a part of the conducting path which supplies electricity to the appliance. In fact, if the ground wire is broken or removed, you will normally not be able to tell the difference.
How do you connect a ground wire to a ceiling fan?
Quote from the video:
Quote from Youtube video: And so you basically put your two wires. Together as close as you can put the wire nut over them and then screw it down holding both wires at the same time. And then screw that wire nut.
What if I don’t have a ground wire for a ceiling fan?
If you don’t have a wire coming in to hook your ground to, what you do is you take your ground wire which is either a solid copper or a green wire, you’ll take that ground wire and you wrap it around the ground screw. Then, you’ll just tighten up that screw and then you’ll hook up your black wire and your white wire.
Is ground wire necessary for ceiling fan?
The most common over current devices installed for the home electrical system are circuit breakers or fuses. The installation of the ceiling fan without the ground wire will not affect the performance of the ceiling fan, however this safety system that is provided through the ground system will not be available.
What if my ceiling fan does not have a ground wire?
If not.. If the box is not grounded, you have two choices: Run a ground to the box. This would mean running a new wire back to the panel (could be bare copper, but if you’re doing the work may be better just to run a new wire – 14/3 would be the best), which could mean opening up drywall.
Can I attach ground wire to mounting screw?
Quote from the video:
Quote from Youtube video: The ground wire from the green terminal on the receptacle. The one that's connected to the metal box.
Where do you connect the ground wire?
Ground wires are typically attached to a ground screw or screw terminal connection on either the light fixture, receptacle outlet, or electrical devices or components including the electrical junction box, or ground lead wire from light fixtures and other the electrical devices which provide a connection for the ground …
