If you’ve got hot water, but no central heating then there are more issues it could be if it’s not the thermostat or the boiler pressure. Common reasons for this particular fault are broken diaphragms and airlocks, or a motorised valve failing.

Why is hot water working but not radiators?

If you are getting hot water to your taps but not to your radiators, this could be an indication that the diverter valve fault is stuck. This is not something that you should try to fix yourself. You need to get in touch with an experienced engineer who is Gas Safe registered.

Why is heating not coming on?





Check your thermostats



If the thermostat is set too low, the heating will not come on until the room temperature is lower than the temperature you have set the thermostat to. Turn the thermostat up to its highest setting and see if this resolves the problem.

Can only get hot water when heating is on?

If hot water only comes out of your taps when the central heating turns on, it is likely that the diverter valve is not diverting hot water properly.

What to do if the heating is not working?


Quote from Youtube video: So if any of the switches in your fuse box are off switch. Them back on again and give your heating another try.

Why are my radiators cold when the heating is on?

Why is one radiator cold when the heating is on? One cold radiator usually indicates that either there is air in the system or there is a stuck valve within that radiator. The thermostatic radiator valve (TRV), like the one pictured below, controls the flow of hot water to the radiator.

Where is the diverter valve on my boiler?





It’s usually a lever that’s situated behind the bath taps that you can pull up or push down. System and conventional boilers don’t require a diverter valve. This is because the hot water they produce is stored in a hot water cylinder.

Why is my boiler not firing up for heating?

A boiler might not ignite due to various possible reasons – insufficient pressure, blockage in the burner, faulty valves, frozen pipes etc. Sometimes, you can fix the problem on your own. In other cases, you don’t have any choice but to call an engineer.

How do I reset my heating system?

Turn your thermostat “off”, then flip the related circuit breaker “off”. Wait 30 seconds, then turn the breaker back “on,” then the thermostat. Set the thermostat to hot or cold, whichever you prefer, and your desired temperature. This should effectively reset it.

Should you bleed radiators with heating on or off?

Should I be bleeding radiators hot or cold? Always make sure your central heating system (your boiler) is turned off and your radiators are cold before attempting to bleed them. When turned on, your radiators contain hot water, and you could be at risk of scalding yourself if you bleed them at this time.

Do you let all the water out when bleeding a radiator?



Bleeding your radiators isn’t the same as flushing a system – you’re not removing the water, just letting the air out. It’s a process that takes just a few minutes, but could improve the efficiency of your heating system and make your home a little toastier.

Do you bleed radiators hot or cold?

Do You Bleed Your Radiators With The Heating On Or Off? You should always bleed your radiators when the heating is switched off and the system has cooled down, because bleeding radiators with hot water flowing through the system increases the risk of scalds and burns.

How do I know if my radiator is flowing?

Quote from the video:
Quote from Youtube video: Going up to the radio inlet. And then the radiator. Out coming down into the bucket. And we can catch the where you want it coming out.

Can bleeding radiators affect boiler?



Yes. During the process of bleeding radiators, air is released from within them, which in turn reduces the pressure in your boiler system.

Which radiators do you bleed first?

If you are bleeding more than one radiator at a time, ensure your central heating is fully switched off before proceeding. In a standard house with more than one floor, the first radiator to bleed should be the radiator downstairs on the lowest floor and the furthest away from the boiler.

What happens if you dont bleed your radiators?

If you don’t bleed your radiator at least once a year, air can become trapped within your radiators. These air bubbles contribute to cold spots in your radiator which make it more difficult to heat up your home.

What happens if you let too much water out of a radiator?

Baird warns that letting out too much water is likely to introduce fresh water into the system, which can make the situation worse as fresh water contains a lot of air. He adds: “Some people also think if a radiator is cold on the bottom but hot at the top then it needs to be bled.