The easy fix is to turn the power off at the breaker, unbundle the white neutral wires, bundle them all together with a big enough wirenut, button things up, and turn the breaker back on, then things should work.

Why do my lights work but not my outlets?

It is possible that one of your outlets is damaged or that it has a loose wire. This issue could also be causing other outlets to lose power. It’s similar to old Christmas lights – when one quits working, there’s a chain effect of failures. The outlets in your home may be wired that way.

Why am I not getting power to some outlets?





If your outlet has short circuited or been overloaded, then your circuit breaker may have shut off its power. Check other nearby outlets to see if they are working. If they also are dead, then go to your circuit breaker. When a circuit breaker has tripped, the lever will usually flip to the middle or off position.

What would cause multiple outlets to stop working?

An Overloaded Circuit. This is a common occurrence. The electricity demanded from the breaker could be too much for it to handle causing it to trip. When a circuit breaker trips, it shuts off the power being supplied to that area of the house.

How do I get my electrical outlets to work again?

Tripped Circuit Breaker



If an outlet isn’t working, check your circuit breaker panel. The breaker that is tripped will appear to be between the ‘on’ and ‘off’ position. Flip the switch to off, then back to on. This will reset the circuit and potentially fix your broken outlet.

Why is my wall outlet not working?

When a wall outlet doesn’t work, there are two possible reasons: a bad connection or a tripped breaker. The bad connection is usually in the outlet itself, and finding the tripped breaker may boil down to simply locating the nearest ground fault interrupting outlet. GFIs can cut power to other outlets when they trip.

Why do the outlets in my room not work?





Experiment by unplugging all appliances in your problematic room, then flipping the breakers to the “off” position and back to “on.” If any one of them fails to snap back into its proper position, or if it trips repeatedly, you probably have got an issue with the electrical panel.

How do I find a dead electrical outlet?


Quote from Youtube video: So you want to make sure your scanner picks it up. So there's a metal contact the end of the probe. Here. So you connect it you can hear it you can hear it trace the wire.