Is all PEX tubing the same?

PEX tubing has a lot of advantages in plumbing applications, but buyers should know the differences between the three types. While all three meet applicable standards, cost, and flexibility, the installation methods do vary. Buyers should remember this when deciding which type of PEX to use.

Does PEX pipe come in different sizes?





PEX is available in a variety of lengths, from short 10-foot pieces (for small repairs) to rolls over 500 feet long, which are used to install a home’s entire water supply system. PEX pipe ranges from 3/8- to 1-inch in diameter and its color-coding makes it a snap to identify what a specific pipe is used for.

Can you expand old PEX?

Another big plus: if PEX A pipe kinks, which is common, you can repair it using a heat gun. The heat will activate the material, causing it to expand back to original shape.

How do you tell if I have PEX A or PEX B?

Quote from the video:
Quote from Youtube video: Problems they're not getting enough water to certain. Places the problem is pex b and i want to explain why pex a and pex b the pipe is pretty much as you can tell the same. Size. Okay i mean

Are PEX fittings interchangeable?

Push-to-connect can be used interchangeable with most types of copper tube size pipe, including PEX, copper and CPVC. No special tools are needed to make these connections. Also, the fittings can be easily removed and reused.

What size PEX tubing should I use?





In general, the greater the distance from the manifold to the fixture, the wider the PEX tubing should be. A 3/8-inch line is sufficient for lengths up to 250 feet; 1/2-inch line will deliver adequate water pressure up to 350 feet; and 3/4-inch tubing is necessary to run a 500-foot line.

What is the outside diameter of 1/4 inch PEX tubing?

1/4″ OD (outside diameter) Bow PEX is perfect for connecting to ice makers, refrigerators, instant hots and more.



Recommended Add on’s.

Size 1/4″ Outside Diameter
Tubing Type Non-oxygen barrier
Warranty 25 Year Manufacturers Warranty
Inside Diameter 1/8″
Outside Diameter 1/4″

Can I use blue PEX pipe for hot water?

Color-Coded: Red PEX pipes can be used for hot water supply lines, blue PEX for cold water supply, and white for either hot or cold. These colors are just for your convenience.

What is the outside diameter of 3/4 PEX pipe?

PEX Pipe Sizes and Dimensions –

PEX Tubing size (CTS/Nominal) Outside Diameter (OD) Volume gal/100ft
5/8″ 0.750″ 1.34
3/8″ 0.500″ 0.5
3/4″ 0.875″ 1.83
1/2″ 0.625″ 0.92

How can I tell which PEX I have?



PEX Pipe Markings

  1. All PEX pipe is manufactured with its design specifications listed directly on the pipe. …
  2. Starting from left to right, most PEX pipe commonly lists their manufacturer’s name.
  3. This name is followed by the manufacturing lot, and the date the pipe was manufactured.

Does SharkBite work on PEX A and B?

SharkBite push-to-connect fittings listed to ASSE 1061 approved for PEX-A, PEX-B and PEX-C pipe.

Which is better PEX crimp or clamp?

Quote from the video:
Quote from Youtube video: Although there are a few pros. And cons to keep in mind for each stainless steel clamp rings resist corrosion more effectively than crimp rings.

How long do PEX clamps last?



Durability. PEX is highly resistant to scale buildup, pitting, and corrosion. You will never have to worry about the restricted flow of water or leakage. ASTM provides guidelines to ensure that PEX pipes’ life expectancy is at least 50 years.

Can you use SharkBite on PEX?

SharkBite brass push-to-connect fittings are compatible with PEX, Copper, CPVC, PE-RT and SDR-9 HDPE pipe. SharkBite fittings come with a PEX stiffener pre-loaded into the fitting for PEX, PE-RT and SDR-9 HDPE. The PEX stiffener does not need to be removed for Copper or CPVC applications.

Are brass or plastic PEX fittings better?

Brass its typically the best choice when the application demands a stronger fitting. In addition, plastic PEX fittings have a thicker wall requirement under ASTM2159 Standard, resulting in a reduced ID which restricts flow, while brass PEX fittings are manufactured to ASTM F1807 allowing for a larger flow passage.

Can you reuse PEX crimp rings?

Even though the crimp rings can’t be used again, the fittings can be when removal is done correctly and the fitting is in good shape. So before throwing the whole fitting away, consider following these steps to remove the copper crimp ring and reuse the fitting.

Is it OK to use plastic PEX fittings?



Plastic PEX fittings are OK



And pros don’t want a callback to fix their own work on their dime. So obviously, pros trust the plastic fittings. Manufacturers trust them as well; the warranties for plastic fittings are similar if not identical to those for their metal counterparts.

Why are my PEX connections leaking?

As with any other pipes, PEX is not prone to leaking. Nearly all of the plumbing leaks occur at joints (connection spots) and most of them are due to incorrect installation. Much like installing PEX tubing, repairing it is also an easy process.

How do you fix a leaking PEX?

Quote from the video:
Quote from Youtube video: There is all PEX crimpers have adjustable screws on them you tighten it and it will tighten the crimp on there. So that way you can take your pipe. Put in your crimper crimp down on it.

How do I test my PEX pipe for leaks?

Pressure Testing PEX Water Lines: 4 Simple Steps

  1. Needed Tools. …
  2. Step 1: Turn off the Taps of Your House. …
  3. Step 2: Connect the Pressure Gauge With the Tap. …
  4. Step 3: Check the Static Water Pressure. …
  5. Step 4: Check the Flow Rate. …
  6. Result 1: Low Static Pressure Reading. …
  7. Solution. …
  8. Result 2: High Static Pressure Reading.