Why is the flame on my propane heater orange?
Orange or yellow propane gas flames give you a warning that your propane gas is not being completely burned. When these color flames occur on the burners of a propane cooktop, the cause is usually related to a burner being out of adjustment or blockages in the air inlet, such as from small, burnt food particles.
What is the L setting on a Rinnai heater?
The room temperature and pre-set temperatures can only be displayed and adjusted when the heater is running. Press the “ ” button to increase the temperature setting or the “ ” button to decrease the temperature setting. The temperatures can be preset to: a) [L] – Temperature is controlled at set temperature “Low”.
How do you use a Rinnai gas heater?
Quote from the video:
Quote from Youtube video: Set the unit to your desired temperature. The economy featural only work above 16 degrees and below 26 degrees and turn the economy light on by pushing the economy. Button.
How do you size a Rinnai wall furnace?
Multiply the square footage by the BTU per square foot to arrive at the total BTU rating you’ll need from your Rinnai heater. All Rinnai heaters are rated for a particular number of BTU, ranging from 8,000 up to 40,000 or more, giving you a lot of flexibility in the model you can buy.
How do you fix a orange flame on a gas heater?
The orange flame is a red flag, and you need to clean the gas stove, which is an excellent DIY project. Remember to unclog the orifices, clean the burner of any debris, switch off the humidifier, regulate the air shatter and dismantle the whole stove before reassembling.
What does a bright orange flame indicate?
If you have a yellow, orange, or red burner flame, this usually means that your burner is not receiving enough air for complete combustion. Besides wasted gas, higher energy bills, and more soot, the main danger of improper combustion is the increased amount of carbon monoxide (CO) produced by the combustion process.
How do I reset my Rinnai heater?
Press and hold the Connect button on the module until the LED blinks RED and WHITE, and then release then QUICKLY tap 3 times. This will restore the module back to original factory settings.
Why does my Rinnai gas heater turn off?
The main reasons that a gas water heater automatically shuts off are because the pilot light goes out, the pilot light can’t start, or there are problems with the gas supply. If your gas water heater keeps shutting off, the thermocouple could be dirty, bent or damaged.
What does 99 mean on Rinnai heater?
Fault Code 99: Flue Block.
How much propane does a Rinnai heater use?
For example, the Rinnai V65iP tankless propane water heater has a maximum capacity of 150,000 BTUs/hr. If you run the water for an hour straight, you will use about 1.65 gallons of propane in an hour.
Is Rinnai a good heater?
Rinnai water heater works great! I purchased the model that has recirculation and the associated app to control temperature and recirculation times. The recirculation and app features greatly reduce the delay of hot water to the faucet. It works great and is easy to set up.
How efficient are Rinnai propane heaters?
Model: Rinnai EX11CTP
The Rinnai Direct Vent Wall Furnace’s reputation lies in its ability to extract up to 82% AFUE efficiency through the use of a unique stainless steel heat exchanger, modulating gas valve, and variable speed blower.
How long do Rinnai gas heaters last?
They can last up to 20 years as long as they are look after and maintained on a yearly basis for more info check with your manufacturer.
Where is Rinnai made?
It will be commemorated in the lobby of the Rinnai America Manufacturing facility in Griffin, Georgia.
How do you clean a Rinnai heater?
Use 4 gallons (15.1 liters) of undiluted white vinegar to clean your tankless water heater. Never use chemical solutions of any kind. Since your home’s drinking and bathing water mostly likely flows through your tankless water heater, using chemical cleaning solutions could be extremely harmful to your health.
Do I need to service my Rinnai gas heater?
Service Frequency
Manufacturers typically recommend that gas heater maintenance and hot water service of their gas appliances be serviced every one or two years. For example, both Rinnai and Bosch generally recommend 2 year and hot water service intervals while Rheem and Paloma recommend annual servicing.
How do you clean a propane heater filter?
Quote from the video:
Quote from Youtube video: The q-tip in the isopropyl rubbing alcohol. And slide it into the pilot tube about two inches. Clean the pilot tube thoroughly with the q-tip. Then remove and discard the q-tip.
How do you clean a Rinnai inlet filter?
Procedure:
- Turn the ball valves to your cold and hot water into the shut position. …
- Take channel locks and loosen filter on cold inlet. …
- Rinse and clean the screens off of the filter.
- Turn ball valve for cold water back to the open position then quickly back to the shut position. …
- Reinstall filter.
What is a code 10 on a Rinnai?
Rinnai fault code 10 – Air supply or exhaust blockage. Check to see that nothing is blocking the flue inlet exhaust or fan.
How often should you change tankless water heater filter?
every 6 months
We typically recommend changing your filter every 6 months. If at the 6 month mark, you notice your filter is very dirty, you may decide to change your filters more often. If at the 6 month mark you notice your filter is still clean, you may decide to give it more time between filter changes.
