What do you do when paint stripper doesn’t work?

Apply a generous amount. If it doesn’t do the job in one hit, you can always give it a second go. Apply the stripping product with a brush then, after the recommended waiting time, remove it with coarse steel wool. This will help you cut into and remove the paint from the surface of the wood.
Sep 26, 2014

How do you get paint out of small crevices?





Slather on some stripper with a cheapo chip brush. You’ll almost instantly see the paint start bubbling up. After a couple minutes, begin scraping with your hefty Purdy scraper to get the bulk of the paint off. Repeat that step again, but this time after scraping, scrub it with your wire brush.
Aug 26, 2013

How do you strip paint that is hard to reach places?

The best way to remove paint stripper is with a plastic or bladed paint scraper. You also can use a putty knife and wire brush for hard-to-reach spots. Always guide the scraper at an angle.
Jun 22, 2021

How do you strip paint out of crevices?

Quote from the video:
Quote from Youtube video: But if this happens to you no worries all you have to do is re-saturate the area with a little bit of mineral. Spirits. Again use the rag to work the mineral spirits deep into the crevices.

How do you remove dried Citristrip?

How do you clean up Citristrip? To remove Citristrip residue, dip fine steel wool ( grade #0000) in mineral spirits or Klean Strip’s Paint Stripper After Wash and use it to scrub off the remaining stubborn traces of paint or varnish.
Dec 8, 2021

How do you know when a stripper is ready?





Depending on the strength of the product and the layers of paint this can take minutes or hours. If you see the stripper thinning out and starting to dry, apply a little more in those areas to keep it coated. Once the paint is thoroughly bubbled and starting to look like the picture here, it is ready to be scraped off.
May 5, 2014

What is the best product for stripping paint off wood?

Top 5 Best Paint Strippers For Wood

  • Citristrip Paint And Varnish Stripping Gel.
  • MAX Strip Paint And Varnish Stripper.
  • Smart Strip Advanced Paint Remover.
  • Peel Away 1 Heavy-Duty Paint Remover.
  • Sunnyside Back to Nature Multi-Strip.


How do I remove citristrip paint from wood?

Quote from the video:
Quote from Youtube video: So firm pressure push down and start running across your piece you can see all that sludge starting to come up. And then dump it in your waste container. And just keep going across just like. That.

Will vinegar remove latex paint?



While there are plenty of paint removers, vinegar is a reliable non-toxic solution and offers an easy way to soften the paint before removing it. And it works well on different types of paints. You can even use it to strip dried latex paint from woodwork.
Nov 3, 2021

Can’t get Citristrip off?

You can apply Mineral Spirits to a heavy-duty paint stripping pad to scrub off any residue and small gummy bits of Citristrip and paint.

What if I leave Citristrip on too long?

Can You Leave Citristrip on Too Long? As I proved above, yes you can leave Citristrip on too long. According to the manufacturer, Citristrip paint and varnish stripping gel will stay active and remove layers of unwanted paint and finish for up to 24 hours as long as it remains wet.
Aug 20, 2020

What happens if you leave paint stripper too long?



Typically the faster acting products use harsher chemicals. The learning curve of stripping is to wait as long as possible without letting the stripper harden. Remove the stripper too soon and you waste working stripper, but leave it on too long and it gets hard requiring starting over. Both waste time.

How long after stripping Can you paint?

How long after stripping can I stain or paint? Wait 24 hours after the piece is cleaned and stripped before adding any stain, sealer, or finish. This will allow any and all fumes to dissipate and make sure the surface is free of any residue.
Feb 26, 2020

How long do you let Citristrip sit?

Citristrip is meant to be left on for anywhere from 30 minutes to 24 hours. I typically find that 1-6 hours is sufficient but it’s always best to test a small area first before removing the whole application. Steel Wool is your friend.
Apr 21, 2022

Will mineral spirits remove CitriStrip?

Citrus strippers such as CitriStrip have a wax in them to keep the product from drying out after it’s applied to the surface. Mineral spirits is recommended after the stripping solution because it’s important to break down those waxes before getting started.