Why won’t my gas fireplace turn on when I flip the switch?
What can happen over the years, is that the connections inside the switch can get dirty, corroded, or broken, causing a loss of this voltage at the switch. So by the time the small amount of voltage gets sent back to the fireplace, it is not enough to signal the fireplace to turn on.
Why is my gas fireplace flickering?
Flame flickers or spits – A draft in the room can cause your flame to flicker. Spitting is often caused by a dirty gas orifice or tube. These can be cleaned with a stiff wire, but you’ll need to remove the pilot light assembly to do so.
What would cause a gas fireplace not to ignite?
If nothing is blocking the tubing, and gas is flowing out, there might be something wrong with the spark igniter and thermocouple. Make sure there’s no debris lodged between the two. If the pilot light ignites but doesn’t stay lit, you might need to replace the igniter.
Should I hear the pilot light on gas fireplace?
If there is a roaring sound that occurs when the pilot light is on, it is usually because the flame needs to be adjusted. A grinding or shrieking noise is usually caused by a fan or blower. Not all gas fireplaces have this feature.
How do you turn on a gas fireplace with a light switch?
Using a Wall Switch to Turn On a Gas Fireplace
Many gas fireplaces come equipped with a wall switch control panel for activating the unit and adjusting the level of the flame. Simply push the “On” button and the pilot should ignite.
What causes gas fireplace pilot to go out?
Some of the possible serious reasons for pilot lights to go out include loose or broken gas valves, thermocouples or heat exchangers, faulty venting, low gas pressure, or high winds. If you believe there is a serious problem, don’t hesitate to contact a professional.
Why does my pilot light keep flickering?
The pilot light needs air to burn, but not too much nor too little. Too much air, in the form of a draft, will cause the pilot to flicker and may blow it out. The draft may be coming from under a door or through a poorly-sealed window, or the draft may be intermittent, occurring only when a door or window is open.
Why is my pilot light flame too high?
So, if your pilot light flame also tends to be too high, ensure that your fireplace doesn’t have a button to bring the flame up or downward. If there’s no such button, adjust a screw on the fireplace. Turning it clockwise will reduce the fire whilst moving the opposite direction will raise it.
Where is the pilot adjustment screw?
The adjustment screw is behind the cap screw. The screw should be turned to decrease the pilot flame.
Will gas leak if pilot light is off?
Although this is an area of concern for many people, the reality is that boilers are built so that the gas supply to the pilot light is shut off if the flame goes out. Whilst the cause of pilot light failure needs to be investigated, extinguished pilot lights aren’t going to cause a gas leak.
How do you adjust the pilot flame on a gas log?
Quote from the video:
Quote from Youtube video: We will now adjust the pilot flame when we turn the screwdriver to the left counterclockwise. The pilot flame will become higher. When we turn the screwdriver to the right clockwise.
How do you fix a low flame on a gas fireplace?
Turn the key valve counterclockwise as far as it will turn to open the gas line. Start the fire by following your gas fireplace lighting instructions. Turn the gas control knob to high to increase the flames in your fireplace if applicable.
Why does my gas fireplace have a small flame when off?
The little flame you see in your gas fireplace after you have turned it off is called a pilot light. A Standing Pilot Light runs constantly, whether your fireplace is on or off. “It’s the middle of summer, why do I feel heat from the front of my fireplace?” “Oh well…it’s only a little flame, it’s no biggy.”
How do I increase the flame on my superior gas fireplace?
To make the flame in the fireplace higher or lower, simply adjust it by turning the gas valve counterclockwise to increase it or clockwise to decrease it as desired. To shut down the fireplace completely, turn the gas valve clockwise all the way to the “off” position.
How high should the flame be in a gas fireplace?
Then, turn the gas on and light the pilot. Turn the burner on and set the flame height to high. Take a reading. This time, you want to see an ideal reading of 3.5 inches or the pressure rating indicated in the manual.
Why is my gas fireplace flame so blue?
A blue flame colour means complete combustion. This indicates that the gas is being burned efficiently without any unburned and wasted gas. With complete combustion you get the maximum heat output from your gas and use less gas to generate heat with whatever appliance you are using.
Where is the pilot light adjustment screw on a gas fireplace?
First, locate the controls on the bottom of a direct-vent fireplace. On some fireplaces, there will be a “Lo-Hi” button that allows you to adjust the flame upward or downward. On others, there will be a screw that you can easily adjust with a screwdriver.
