Is brass or PVC better for tub drain?
Benefits of PVC Drains
PVC is lightweight and easier to work with, whereas brass often requires more specialized labor. Plastic drains are self-insulating and, because they are smooth, do not create slime deposits. They are also known for tight fittings, making them more waterproof and leakproof than brass.
Are bathtub drains interchangeable?
Although shower and tub drains serve the same function — to dispose of wastewater into your pipe drainage system — each one performs the task differently, and there are drain differences. Standalone shower tub drains and a tub or bathtub and shower combination drain cannot be used interchangeably.
What kind of pipe do you use for a tub drain?
Tub drain assemblies are commonly made from one of three different pipe materials: brass, ABS (acrylonitrile butadiene styrene) plastic, or PVC (polyvinyl chloride plastic). Tub drain assemblies can be joined with slip fittings (brass, ABS, or PVC), or with solvent-glued fittings (ABS or PVC only).
How do you seal a bathtub drain flange?
Quote from the video:
Quote from Youtube video: The most ideal solution to seal this area is using plumber's putty. Using plumber's putty works best for it creates a waterproof seal when used on wet surfaces.
How tight should a tub drain be?
Then use your wrench to tighten, by one quarter of a turn. Do this carefully, so as not to squeeze the gasket underneath the tub out of place. The connection needs to be tight to prevent leaks, but tightening it too much risks cracking the tub or breaking the seal.
Is a metal P-trap better than plastic?
The plastic P-Traps are the least expensive of the two but is not as attractive as the metal traps. take apart to clean or service. Take care when using tools on the fittings as this could damage the finish.
What size is bathtub drain pipe?
According to Bonnets Stems and Accessories, Inc., a standard modern bathtub drain is 1 1/2 inches in diameter – the width straight across the middle. Rough-in plumbing should be calculated for a 1 1/2-inch pipe.
How do you replace a tub drain pipe?
Quote from the video:
Quote from Youtube video: But you're going to turn the needle nose pliers until he gets loose. So now once it gets loose you can just do it by hand by sliding that out like this. And probably takes about 7 to 8 turns.
What does reversible bathtub drain mean?
Reversible Drain
A drop in tub is inserted into a pier, and because of that drain handing can be switched by rotating the tub.
How do you seal a bathtub drain hole?
Quote from the video:
Quote from Youtube video: And I'm gonna put some plumber's putty in there. So before you begin just wipe down and clean up the area like around the drain hole. You don't want anything and they had to possibly.
Can you use Teflon tape on tub drain?
The manufacturer recommends using teflon tape on the threaded connections. Instructions: 1. You will begin assembly with the shoe of the drain and the connecting pipe.
Can I use silicone to seal bathtub drain?
Conclusion. Plumber’s putty and silicone can both be used to seal a bathtub drain. Neither is inherently better than the other.
Should I use plumbers putty on bathtub drain?
Using plumber’s putty works best for it creates a waterproof seal when used on wet surfaces. In case you find it challenging to reach the underside area of the tub drainage pipe, then your best option will be silicone caulking. Use the caulk to seal the exposed drain area.
Should I use plumbers putty or silicone?
Plumber’s putty and silicone are two types of plumbing compounds that you can use to prevent leaks and create watertight seals for plumbing fixtures. Putty offers more flexibility and easier removal, but silicone caulking creates a stronger waterproof and weatherproof seal.
Do not use plumbers putty on plastic?
Plumber’s Putty: Contrary to popular belief, this is NOT the plumber’s “duct tape”; plumber’s putty is a malleable substance used as a sealant for plumbing fixtures to aid against water exposure. –DO NOT use plumber’s putty on plastic or metal threaded pipes to seal between joints. This is a job for Teflon tape.
What happens if you don’t use plumbers putty on drain?
Yea, don’t skip the putty, or something, on the sink parts I’m working on without the putty there is no seal. THREADS ON FITTINGS DO NOT MAKE A WATERTIGHT SEAL. Never have, never will, by virtue of you being able to screw things together, they’re not sealed tight. Your answer isn’t contributing to the question asked.
Do you need plumbers putty if you have a rubber gasket?
Well, technically, you could use plumber’s putty on rubber gaskets (as long as it’s approved for use on rubber). But if you’re assembling a new sink drain assembly, there’s really no point, especially if it comes with its own fitted rubber gasket.
When should you not use plumbers putty?
Do not use plumber’s putty where you need adhesive strength (to bond materials or prevent them from moving) or where you need a watertight seal in exposed areas.
What’s the difference between plumbers putty and plumbers tape?
Teflon tape, also called plumber’s tape or thread-seal tape, gives a reliable seal on threaded pipe joints for liquids and gases that may be under considerable pressure. The plumber’s putty acts as a flexible caulk in situations where you need water resistance—but it cannot withstand any significant pressure.
What kind of plumbers putty for shower drain?
Quote from the video:
Quote from Youtube video: Hi I'm Vance and welcome to repair and replace plumbers putty is a clay-like substance used to make watertight seals on faucets and drains. It's not an adhesive. And it doesn't bond to surfaces.
