How do you wire a 3-way dimmer switch with two lights?
Quote from the video:
Quote from Youtube video: The ends together if there are two Reds one will actually connect to the white secure. Them together with a wire nut until it's tight and won't turn anymore.
Can I put a dimmer on a light with 2 switches?
With a standard single-pole dimmer, a single switch controls the light. With a three-way dimmer, you can control a light with two switches. You will need a three-way dimmer and a three-way switch. This lets you dim from one location and turn the lights on and off from another.
Can dimmer switches be used with 3-way switches?
Dimmer switches can be installed on a three-way switch. This allows two controls to turn the light on and off, with a third switch left for the dimming function. Three-way switches can be used with single-pole applications when installing a dimmer switch.
Can you install a 3-way switch on a 2-way?
To change a three-way switch to a two-way switch, deactivate and remove the extra three-way switch. A three-way wall switch is single pole double throw (SPDT) with three connection wires and is typically wired with 12/3 or 14/3 cable between the two switches.
How do you wire a three way switch with two wires?
Quote from the video:
Quote from Youtube video: So there we have a complete circuit with a two wire cable on the incoming power supply a three wire cable between the two switches. And another two wire cable from switch 2 over to the light fitting.
How do I wire a 3-way dimmer switch?
Quote from the video:
Quote from Youtube video: These are interchangeable. Start by wiring the bear ground wire from the house to the green ground wire on the three-way switch screw on a wire nut and tighten it.
Can you have 2 dimmers on a 2 way switch?
Two way dimming allows you to dim a light fixture from two locations. You can’t use ordinary rotary dimmer switches to do this because you could potentially dim the light down to 10% with one dimmer, then walk over to the other dimmer and attempt to dim the light to below 0%.
