Do you have to use plumbers putty when installing a new sink drain?

Well, technically, you could use plumber’s putty on rubber gaskets (as long as it’s approved for use on rubber). But if you’re assembling a new sink drain assembly, there’s really no point, especially if it comes with its own fitted rubber gasket.

Should I use silicone or plumbers putty for sink drain?





Plumbers Putty or Silicone for Sink Drain



You can use silicone caulk or plumber’s putty to seal sink drains. Plumber’s putty may crack and cause leaks as the clay dries out with time. But it’s the preferred choice of sealant if you’ll be adjusting or removing the drain.

Where does putty go on sink drain?

Where to Use Plumber’s Putty. Plumber’s putty is commonly used to seal along the base of faucets and other sink fixtures before setting them onto the sink. It’s also applied to the undersides of sink strainers and pop-up drainfittings for sinks and tubs.

How do you seal around a sink drain?

Quote from the video:
Quote from Youtube video: Place a bead of silicone. All around that mating surface. But try not to get it on the threads at all place it down in and press firmly.

How soon can you use sink after plumbers putty?

You can start using the sink drain or faucet immediately after installing plumbers putty. There is no drying time because it doesn’t dry. It just seals the gaps and the sink, drain, or faucet which can be used immediately after application of the plumbers putty.

Do you need plumbers putty if you have a rubber gasket?





The rubber gasket should be sufficient to seal without putty.

How do you seal a new kitchen sink?

How to seal a kitchen sink: Step by step

  1. Remove old sealant. Scrape it off with a putty knife or cutting tool. …
  2. Clean the area. Avoid exposing the surface to water. …
  3. Prepare the silicone sealant. …
  4. Apply the sealant. …
  5. Smooth the sealant. …
  6. Remove excess sealant. …
  7. Wait for the sealant to dry.


Should I use plumbers putty?

If you need to stop or prevent leaks around your faucet, sink or tub drains − plumber’s putty is the product you need.

Do you caulk around sink drain?



You must seal the area between a sink’s drain body and the actual sink surface. Otherwise water will leak out between the two and begin dripping under the sink. Some plumbers and installers favor plumber’s putty for installing drains, while others lean toward the more modern waterproof material called silicone caulk.

What to use in place of plumbers putty?

Instead of Plumbers Putty, you can use epoxy putty or Teflon tape.

Can I use pipe thread sealant instead of plumbers putty?

Plumber’s putty is commonly used under kitchen sinks to seal the area between the sink edge and the counter top, and on sink and tub drains. While pipe dope is used on pipe threads where there is pressure, plumber’s putty is generally used to fill gaps in drains and on sinks.

Is plumber putty permanent?



Plumbers generally prefer putty rather than silicone for sealing sink drains because it forms a watertight bond and doesn’t make the bond permanent.

What is a plumbers putty?

Plumber’s putty is a soft, pliable compound that can be used to make watertight seals. It used to be a plumber’s best friend. Now, many plumbers choose to use caulk instead. However, there are still times and places where plumber’s putty is the best option.

Is plumber’s putty necessary for kitchen faucet?

If you’re installing a faucet, it may be necessary, but you also might not need it. The reason being is that some faucets come with a rubber or plastic gasket or trim ring near the faucet deck plate that fits over the faucet holes in the sink. In that case, plumber’s putty isn’t completely necessary but doesn’t hurt.

Should you use plumbers putty on new faucet?

Quote from the video:
Quote from Youtube video: Hi I'm Vance and welcome to repair and replace plumbers putty is a clay-like substance used to make watertight seals on faucets and drains. It's not an adhesive. And it doesn't bond to surfaces. So

Where do you put plumbers putty on a kitchen faucet?



Quote from the video:
Quote from Youtube video: Start by removing the old faucet and scrape old sealant or putty on the surface of the sink with a putty knife. Clean. And dry the surface. If your faucet has a base apply plumber's putty underneath.

Where do you put plumbers putty in a kitchen faucet?

Quote from the video:
Quote from Youtube video: Next we're going to add some putty to the bottom of the gasket to be sure we don't leak water between the plate. Down through the holes of the sink.