Thanks ! The fan for some condenser coils are temperature controlled making sure all the heat is removed. Turning the fan off it may cause problems with the system’s ability to control the temperature the make and model would be helpful. The moment the compressor shuts off, the condenser is rather hot.

Should the condenser fan run when the compressor is running?

Yes, that is your condenser fan motor, it should be running at all times when your compressor is running. You’ll need a multimeter to see if your getting 120 volts to it. If your getting 120 volts to it and its not turning then its bad.

Should fridge fan always be running?





The evaporator fan is responsible for circulating the cold air from your coils and into the refrigerator section. Without it working, the cool air will not be efficiently blown onto your fresh food. However, your refrigerator will still try to maintain that temperature by instead just running all the time.

Does a refrigerator compressor fan run all the time?

It is typical for a refrigerator compressor to run anywhere between 4 to 8 hours straight before shutting off. In fact, newer refrigerators are expected to constantly run 80-90 percent of their lifetime.

Why is my fridge not cooling but fan is running?

The most common reason why a refrigerator is not cooling is a problem with the evaporator coils. Over time, evaporator coils can become covered with ice, which prevents the coils from working properly. If the coils are covered in ice, the ice will need to be defrosted to fix the problem.

How often should the evaporator fan run?

The evaporator coils are usually located behind the freezer compartment, and the evaporator fan should be right in front of them, although it may be offset to one side or the other. The fan should come on whenever the compressor cycles on. If it doesn’t, the refrigerator won’t get cool enough to preserve your food.

How important is the condenser fan?





The condenser fan found inside the outdoor unit plays a critically important role in your air conditioner’s performance. The fan’s motor powers the spinning blades that create cooling air movement across the condenser coil, which aids in heat transfer.

How do I know if my refrigerator compressor is working?


Quote from Youtube video: Vibration going on if it's running and you should be able to hear a noise. But if you can't detect any of that.

How do I reset my refrigerator compressor?

4 steps to reset a refrigerator compressor

  1. Unplug your refrigerator. …
  2. Turn off the refrigerator and freezer from the control panel. …
  3. Reset your freezer and fridge temperature settings. …
  4. Wait for the refrigerator temperature to stabilize.


What does a refrigerator evaporator fan do?



The evaporator fan motor is part of the overall refrigeration system, and it pulls air through the coils of the evaporator to remove heat from the circulating air.

What are the signs of a bad refrigerator compressor?

Signs of a Faulty Fridge Compressor



Not Cooling – As the compressor circulates coolant through the fridge mechanism, lack of proper cooling is a clear sign that something is wrong with it. If the issue persists even after cleaning your appliance’s back, call a professional for some help.

What are the two fans on a refrigerator?

One is under the refrigerator to cool the compressor and force air through the exterior coils. The second is inside and moves air around the coils inside the refrigerator. This second fan helps provide more even cooling, and also aids in the defrost process.

What causes fridge to stop cooling?



Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan). To do this, unplug the fridge and pull it out. Clean the fan blades and spin the fan by hand to see if it’s stuck.

What is the first thing to check when refrigerator stops working?

If Your Fridge Has Stopped and the Light is Off



As obvious as this sounds, often a fridge shuts down completely because it’s simply getting no power. The first thing to check is the breaker (in your home’s electrical service panel) of the circuit serving the fridge.

Will unplugging a fridge reset it?

Yes, unplugging the refrigerator will reset the appliance, provided you leave the refrigerator unplugged and undisturbed for 45 to 50 minutes.

How do you test a compressor relay on a refrigerator?

Quote from the video:
Quote from Youtube video: You can test the overload. You can do a visual check and you can test power going to the compressor. Here's the difference between a good and bad start really on the inside.

How can I tell if a relay is bad?



Quote from the video:
Quote from Youtube video: Out. Sit it down right there take your other relay. Out. Alright and swap them and then see if the problem goes away with your horn see if it blows if it blows then you probably had a bad relay.

How can I run a fridge compressor without a relay?

Compressor Direct Start Without Relay



Then, locate the cover plate at the bottom rear of the refrigerator and remove it with a screwdriver. Set the cover plate aside. Next, push or flex the metal box in the lower right rear of your refrigerator to disengage it.

What is the function of relay in refrigerator?

Relay is an Electronic component which helps compressor of your Refrigerator to start. A faulty Relay can damage a Compressor or can also cause a Short circuit in Wiring. PTC stands for Positive Temperature Coefficient. This refers to the Alloy chip inside the relay whose resistance increases as its temperature rises.

What does a capacitor do on a refrigerator compressor?

The run capacitor of the refrigerator is an important component in its start up relay. The run capacitor assists the refrigerator compressor, which should only run for a few minutes in any given hour. If it runs longer than that, the compressor can overheat or its motor can burn out.