Can you install recessed lights in a concrete ceiling?

Existing Concrete Ceilings



To install recessed lighting into a ceiling, a circular shape will need to be cut out and then the lighting installed. When dealing with concrete, this is not an easy task. If you to try drill into the material, you could end up doing more damage than good.

How do you install recessed lighting with existing fixtures?





Quote from the video:
Quote from Youtube video: If it's a new build you do have to locate it onto a joist or a stud. And then inserted the light fixture into the hole using the push spring loaded clips. And then turn back on the breaker.

How do you put lighting on concrete?

Quote from the video:
Quote from Youtube video: Put one in the middle. 20 so 20 seems to be about average. I think we'll go 10 inches in the center.

Can I replace a ceiling light with a recessed light?

Converting a standard ceiling light fixture to a recessed light involves removing the old fixture and its electrical box and installing the new recessed light, usually in the same place. Alternatively, you can install the new light in a different location nearby.

How do you run wire on a concrete ceiling?

Cut a shallow groove in the ceiling to the nearest wall with electrical box nearby. Snake a wire from electrical box to the ceiling, then lay wire in the groove and spackle it over. Install the fixture (I have not decided on exact type yet, probably something hanging like a chandalier) with concrete bolts.

How do I know if I have a concrete ceiling?





If the lower surface of the concrete slab is not covered with another material, such as plaster, paint or timber, it becomes an exposed concrete ceiling. Concrete ceilings can also be the exposed roof construction of a one-storey build or the top floor of a multi-level build.

What is the difference between can lights and recessed lights?

Recessed lights, also known as can lights, are described as metal light housings installed in the ceiling for a sleek look that gives you back your ceiling. Their diameter generally varies from 3” to 6.”

How do you retrofit recessed lighting?

Quote from the video:
Quote from Youtube video: Off then remove the existing bulb be careful though the bolt may be hot if the light has been on next we need to remove the trim of the existing. Recessed. Light just grab the trim.

Can you install recessed lighting without housing?

Yes, you can install recessed lighting without housing. You can get this done by a certified electrician or choose to do it yourself. Before you jump into the DIY project, make sure you have basic wiring knowledge and tools at hand.

How do I wire a recessed light to an existing switch?



One wire (should be black) will be the hot to the switch. The other (should be red on the 3-wire, or on 2-wire the white wire which SHOULD have red tape or paint applied to it) will be the switched hot, from the switch, back to the first fixture. The neutral for the circuit will be at the fixture in this case.

How do you install LED recessed lighting in existing ceiling?

Quote from the video:
Quote from Youtube video: As always the most important step in any electrical.

How do you install a ceiling light with existing wire?

Quote from the video:
Quote from Youtube video: You just slide the screws through the slide and get it started in the junction. Box. Then you can use your screwdriver. To tighten the screws that mount the mounting bracket to the junction. Box.

How do you hide wires on concrete ceiling?



You Can Use Cord Covers for the Ceiling Wires



Cord Cover Raceway and Paintable Cord Concealer both come as white sets of cord covers. You can paint them however you want to match your decor, or you can keep them that way for an accented look on your ceiling beams if the beams aren’t white.

Can you bury electrical wire in concrete?

Installing Buried UF Electrical Cable



Underground Feeder, UF cable, cannot be run inside concrete.

Can you put electrical wire in concrete?

You’ll have to cut a trench in the concrete for a PVC conduit, which will carry the electrical cable under the floor. The best spot for that trench will be underneath a flooring strip that runs perpendicular from the nearest wall to the spot where your island will be.

How do I install an electrical outlet in a concrete slab?

Quote from the video:
Quote from Youtube video: And power conduit to the power conduit entry. If you need to split power conduit. Use the Y adapter by connecting it directly to the reducer. Next place your low voltage divider.

Does concrete damage PVC cables?



Very little attacks PVC. Heat and sharp bits spring to mind and it’s not clear if you are proposing pouring concrete on PVC cable or what. Consider protection from sharp stones if in floor or if along a wall chase, it may not be necessary.

Are floor outlets legal?

The National Electrical Code requires floor outlets to be a part of an approved assembly consisting of a metal box, gasket seal, special receptacle and strong cover plate with a moisture-proof cover. You can’t just mount a regular wall outlet in the floor. The first time someone stepped on it, it would break.

How do you install a recessed floor outlet?

Quote from the video:
Quote from Youtube video: So I just mount this to the floor. And then hook up your outlet. And your covers. And that's it and hook it up to the nearest junction in the basement.