Can you have a ceiling fan with recessed lights?
A separate wall switch will be required for the ceiling fan. A separate wall switch will be required for the recessed can light fixtures. The connection at the ceiling fan would leave one switched wire for the ceiling fan operation.
How far should recessed lights be from a ceiling fan?
I have been researching the exact topic over the past several days and it seemed like the consensus was a minimum of 24” from tip of fan blade to the can light.
How do you wire a ceiling fan with a can light?
Quote from the video:
Quote from Youtube video: And light fixture to install connect the green and grounding wires. Together then the white wires. Together. Then connect the fans blue and black wires to the homes black and red wires.
Can you put a light fixture where a ceiling fan used to be?
An outdated ceiling fan can be replaced with a modern light fixture to give a room a fresh look. Because most ceiling fans are heavier than the average light fixture, the ceiling electrical box and wiring can be used.
Can you put a ceiling fan on a 3 way switch?
If you want combined control, connect the ceiling fan box’s black wire to the three-way switch’s common lug. Next, connect the red and black travelers from the other switch box onto the other switch lugs.
How do I stop my ceiling fan from shadowing?
Avoid ‘overlapping’ your ceiling fan and lighting
Strobing occurs whenever a ceiling fan blade crosses between a light source and your eyes. So one way to avoid this effect is to space the downlights closer to the edge of the room and away from the fan. This minimises the angles from which you see ‘chopping’.
Is recessed lighting outdated?
Recessed lighting will never go out of style. However, the finishes and sizes will vary and change as time goes by. There are too many advantages of having the lighting recessed for them to eventually go out of style or phase out.
How many can lights for a 12×12 room?
How Many Can Lights For A 12×12 Room? The typical rule-of-thumb is 24″ from each wall, and then 3-5 feet between cans. So in a 12′ room you’d probably want two rows of lights. Considering it is a bedroom and you don’t need it as bright as a kitchen, you can probably get away with 2 rows of 4 lights for a total of 8.
How do you prevent can lights from shadowing?
If your recessed lights are not placed the correct distance away from your walls, you can have shadows in your corners which can have the visual effect of making your ceilings look lower than they are. To avoid this, you want to place your recessed lighting approximately 3 feet away from any walls.
Can you install a ceiling fan without an outlet box?
Quote from the video:
Quote from Youtube video: Go ahead and install it without a box because when your fan cover goes over it it's basically a box. So what we'll do is we'll go ahead and install that here.
Can you install a ceiling fan with only one light switch?
Most new ceiling fans can be wired to either a single switch or a double switch. With single-switch wiring, power to the fan is controlled by a standard single-pole wall switch, like a regular light switch.
How do you install a ceiling fan with a light switch?
Installing a Ceiling Fan with Existing Light Fixtures
If the power source is at a fixture then a cable could be installed to extend the power source to the desired location of the ceiling fan. If the power source is the switch box, then you have the option to do the same, extend the power to the desired location.
How do you wire a light and fan on separate switches?
Connect each of the two switched hot wires (typically one black, one red) to the switched hot screw on a switch. Use a wire nut to connect the panel white neutral to the neutral wire going to the fan/light. In the fan/light junction box, connect each switched hot to one of the hot wires on the fan/light.
How does a 3 way ceiling fan switch work?
Quote from the video:
Quote from Youtube video: And that's either the switch leg from the light fixture itself coming down to you or power source in this particular case this is what we call a dead end three-way.
Do you need a special switch for a ceiling fan?
Most remote-controlled ceiling fans don’t need a wall switch, but you can use a wall switch if you want to. Remote control ceiling fans use a transmitter to control when the fan is turned on or off, which makes a wall switch completely optional.
Can you wire a fan and light on the same switch?
You can install a ceiling fan with a light in a room with a single light switch with a simple wiring trick. First, turn off power to the fixture at the electrical panel. Second, remove the light fixture in the room but don’t unwire it just yet.
Can a ceiling fan be installed without a wall switch?
There’s no problem installing the fan without a switch. In many cases folks replace a switched ceiling light fixture with a fan, so the fan uses the switch that used to control the light.
How do I know if my junction box will hold a ceiling fan?
The manufacturer must have marked the outlet box system to indicate that it is acceptable for ceiling fan installations. If the original box is not listed for this purpose, it must be retrofitted and attached securely to the building structure.
Do you need a special box for ceiling fan?
Most building codes require ceiling fans to be mounted on special fan-rated boxes, which are made of metal or strong plastic and have deep-threaded holes for the mounting screws. The box must be mounted firmly, either by attaching it directly to a framing member or by using a fan-rated brace.
Can a plastic electrical box support a ceiling fan?
Electricians use both metal and plastic boxes, and the latter are preferred in some cases because they are inexpensive, easy to use and naturally insulated. They aren’t made for supporting much weight, however, and shouldn’t be used to support a ceiling fan.
