4 Answers
- Close the water supply valve at the wall.
- Flush the toilet to (mostly) empty it. …
- Detach the water supply at the underside of the tank. …
- Remove the caps for the base mounting bolts (2 or 4), and then remove the nuts.
- Cut any caulk present against the floor with a utility knife.
Can you Retile bathroom floor without removing toilet?
While it is possible to install a new linoleum or ceramic tile floor without removing the toilet, it is not recommended and actually can increase the labor involved in the project.
Do you need to remove toilet to redo bathroom floor?
Installing new bathroom flooring requires removal of the toilet. This will allow you to remove the old flooring and properly reseat the toilet on top the new floor. Before removing the toilet, you will need to disconnect the water supply line, drain all the water and remove two nuts.
How do you remove tile from under a toilet?
Remove any resilient flooring such as vinyl or linoleum with a utility knife and a floor scraper. Cut the flooring into small sections with the knife to make it more manageable, then scrape off the top layer with the floor scraper. Move away from the toilet flange at all times to avoid damage to it.
Do you tile around the toilet or under the toilet?
To install tile properly around the toilet, you need to affix it to the floor under the fixture. Because toilets sit on top of tile, any rough cuts are hidden, making it easy to achieve the appearance of tile that has been custom-cut for your bathroom.
How do you cut ply around a toilet?
Youtube quote:All right so we said we need to be about three eighths beyond. So the inside was four and uh sixteen but so that'd be three eighths three is just three quarters four and three quarter hole.
How do you install vinyl flooring in a bathroom without removing the toilet?
Youtube quote:So that you can cut around the toilet in place. And have a flat seam behind it using a grout line to be the same behind the toilet. Make a relief cut at the front edge of the center of the toilet.
How do you put flooring under a toilet?
Youtube quote:If you have a wax one you'll have to scrape it off and this one i have a rubber gasket easily comes off take a scrap piece of cardboard. Now place the cardboard on top of the drainage.
Should you tile behind a toilet?
The bathroom fitters are unanimous—if you’re looking for a high quality finish, with a better seal against water damage, then always tile the floor first.
Can I install laminate flooring around a toilet?
Youtube quote:According to the line you drew. Then you can place the board's around the round shape. You can remove pencil stripes with a rag and some cleaner finish.
Do you need to grout under the toilet?
If the toilet sits securely to the floor without rocking or leaving any noticeable gaps, it is not technically necessary to grout or caulk the toilet to the floor. This is a matter of aesthetics and personal preference.
Do you tile under a toilet flange?
The toilet flange needs to be on top of the finished floor. Meaning the bottom edge of the flange needs to be on the same plane as the toilet. So if your toilet sits on the tile, the flange needs to be on top of the tile too.
Do you tile walls before or after fitting a bathroom?
mj Guest. If you have the luxury of not needing to use the bath, then tile before you put it in. It’s much easier & less chance of damaging the bath. Just fit the last row of tiles adjacent to the bath after fitting.
Can you tile around a toilet?
You’ll need to make more curved cuts, and will have less room to work in with the toilet in your way. Tiling around a toilet base means it’ll need silicone caulk or grout where tile meets toilet—this gives a seamless transition look. However, at times toilet seals need to be replaced.
Should you tile all walls in a small bathroom?
Should a bathroom be fully tiled? No, it doesn’t have to be. Traditionally, tiles are used in wet areas of a bathroom (around the bath and within the shower enclosure) as a means to waterproof walls but there are now alternative materials to add a decorative, waterproofing to bathroom walls.
What do you tile first in a bathroom?
Whilst you can tile either one first, popular opinion based on experience is that is is easier to tile the walls first and then the floor, if you are tiling both in a room. This ensures that you keep the floor tiles cleaner as you won’t be doing so much work around them once they are installed.
Is it better to tile the whole bathroom?
It’s a style preference, but it has implications for the cost and practicality of your bathroom renovation too. Fully tiled bathrooms are convenient, particularly for smaller and second bathrooms. They are easy to maintain with less decorating, and many homeowners enjoy the cohesive look of covered walls.
Should you tile floor to ceiling in bathroom?
As a whole, most experts agree that shower tiles should go to the ceiling. Tiling all the way up to the ceiling keeps the areas surrounding the shower clean and dry. It also has some visual benefits such as making shower space feel larger and more modern. Floor-to-ceiling tiles may not be right for every bathroom.
How do you prepare a bathroom wall for tile?
Firstly there are some basics steps to take before tiling a wall including:
- Removing any screws/photo hooks/nails or other fittings.
- Remove any loose plaster.
- Remove old wallpaper.
- Fill any large cracks/holes in the wall.
- Ensure the wall is level and sand if required.
- Remove any dust with a vacuum and wipe clean the walls.
Can you tile on plywood?
Tile can be laid on plywood. But do not install tile directly on the plywood subfloor itself. Use an intervening layer of a sheet of thinner plywood.
Can I tile onto plywood wall?
If you are working in an interior setting in a dry area where the tile will never come into contact with water, you can install the tile directly onto the face of the plywood so long as you use the proper type of thinset.
