How do you get a stuck cartridge out of a mixer tap?
Quote from the video:
Quote from Youtube video: So you want to get some CLR just like I did there spray the CLR. All over the top where the cartridge threads down into the valve body. Let that set up for a few minutes tap on it a little bit.
How do I remove a faucet cartridge?
Quote from the video:
Quote from Youtube video: It using an allen wrench. Then lift it off twist the bonnet nut counterclockwise to remove it lift out the cam. Then the packing and ball valve remove the seats and springs using a small screwdriver.
How do you remove a kitchen faucet cartridge?
Quote from the video:
Quote from Youtube video: First you will need to turn off the hot and cold water supply valve under the sink. Next you will need to remove the single lever handle. This may require using an allen wrench to loosen the handle.
How do you change a single tap cartridge?
Quote from the video:
Quote from Youtube video: Below with water. So we're going to change the cartridge in this tab. New cartridge looks like that's so you've simply got a ceiling ring at the bottom. And then you've got the lever on the top.
How do you free a seized tap gland?
Quote from the video:
Quote from Youtube video: The way I get around it is I get a cardboard toilet roll tube and cross it using a post azuz. And then also do is wrap it around their swords it's tight. And then put a piece of tape. On.
How do you remove a stuck faucet stem?
Use WD-40 on the stuck faucet. Spray the lubricant so that it completely penetrates as much of the valve stem and cartridge as possible. Let it sit for several minutes, then try to remove the cartridge.
How do you remove a single handle bathroom faucet cartridge?
Quote from the video:
Quote from Youtube video: Use a wrench to twist back and forth to loosen the cartridge. Now use the pliers to pull the cartridge straight out of the valve.
Why is my faucet still dripping after changing the cartridge?
Your faucet may contain a ceramic, brass, or rubber seat that is meant to form a seal at the bottom of the cartridge opening. The seat can become damaged with use so that it no longer fits correctly into the hole in the cartridge, which allows water to leak. The O-ring may also become cracked and cause a leak.
How do you use a cartridge puller?
Quote from the video:
Quote from Youtube video: Don't go on either side of the cartridge there and then you can just tighten that screw on it it will go in the cartridge. I'll pull that up here. And take this guy on.
Can you use WD40 on a stiff tap?
If you have hard water, descale the tap and spray on a little WD40. Turn the water off by closing the hot and cold valves under the sink. If you can’t find the valves, shut off the main water supply instead.
