Removing a Knockout Look on the side of the box and locate the knockout where you want to install your cable. Some knockouts have a straight slot in their center. To remove this type of knockout, insert a straight-bladed screwdriver into the slot and twist back and forth until the knockout separates from the box.
How do you remove knockouts from a metal electrical box?
Quote from the video:
Quote from Youtube video: So the first one find the spot well I go the opposite. I knock it out then you'll take your pliers on the underside. And you'll twist it out.
How do you remove knockout plugs?
Quote from the video:
Quote from Youtube video: So with a common everyday hammer and a screwdriver. Simply knock the plug. Out. Once you have the plug. Out you'll need to use pliers.
How do you open a metal junction box?
Quote from the video:
Quote from Youtube video: So let's put the screwdriver down first i just want to show you guys how easy. This tool is to knock out these boxes.
What is a knockout box?
Knockout boxes for electrical applications provide the flexibility of onsite setup of cables, wiring, or conduit. Made from durable polycarbonate plastic, the enclosures are molded with metric knockouts that can simply be removed with a screwdriver.
How do you punch a hole in a metal electrical box?
Quote from the video:
Quote from Youtube video: You see they have pre-cut holes in this metal box so to make an entry for the cable in this type of metal deck box thank you put it on their hard surface use a screwdriver a hammer.
How does a knockout tool work?
“The Force Logic system speeds the knockout process by allowing punches and dies to be quickly aligned on the work surface without the weight of the tool. The user then snaps the tool onto the punch-and-die assembly and pulls the trigger to punch the hole.”
How do I remove conduit from junction box?
How to Repair and Remove Conduit for Electric Wires
- Step 1: Shut Off the Electricity Flow. …
- Step 2: Disconnect the Wires Near the Damage. …
- Step 3: Pull One End of the Wires Out of the Conduit. …
- Step 4: Unscrew or Use Pliers to Remove Conduit Supports. …
- Step 5: Unscrew the Electrical Conduit Fittings. …
- Step 6: Measurements.
How do you remove wires from electrical box?
Quote from the video:
Quote from Youtube video: Okay what we do is we take the small screwdriver and stick it into the rectangular slot that's directly under the wire. We push that in with our thumb. And pull the wire with the other hand.
How do you remove wire from electrical box?
Quote from the video:
Quote from Youtube video: Take that panel off have your screws. And what you want to avoid is. This is the main power. I turn that off and then you just want to avoid.
How do you remove a snap lock connector?
Quote from the video:
Quote from Youtube video: You need a pair of needle nose pliers. And then you need to grab. Each of these ends here. And sort of wiggle it out. And they come out just like that.
How do you remove wire splicers?
Quote from the video:
Quote from Youtube video: Pull away from the connector and will go back and forth and it will come out again make sure the power is off I'm going to attempt to do. This I've got it on the tripod.
How do I remove a Romex connector?
You can remove them from the knockout by applying pressure to the inside lock tabs with a screwdriver, However, it’s a locked wedge fit around the wire and generally requires cutting the wire. If you’re careful you could probably use a tiny tim type hacksaw and cut the nylon connector.
How do you remove splice wire connectors?
Quote from the video:
Quote from Youtube video: Well it's actually pretty simple you grab a hold of this on one end and you grab the wire on the other. And you simply twist. While you pull them apart.
How do you remove a pigtail connector?
Quote from the video:
Quote from Youtube video: Okay there you go pull the tab back. And the connector came out. So basically when we pull the tab back is coming off this little hole right here the tab is inserted in there so it won't let this out.
Can you undo spliced wires?
whilst supporting the splice. The odds are that it will just pull out, especially if the heater wire is stranded and warm. You can then overwrap the through wire, complete with splice, with self-amalgamating tape.
