How do you change a washer on a bathtub faucet?
Quote from the video:
Quote from Youtube video: And that way you can get a good grip on it just turn that undo the screw remove the old washer. Replace the new washer. Put the screw. Back. In tighten it down don't over tighten it just make it snug.
How do I fix my 3 knob shower?
Quote from the video:
Quote from Youtube video: These are the correct ones right here. And these are put on clockwise. And so to get them off you just go counterclockwise. And sometimes it's hard to do.
Why does my bathtub have 3 knobs?
Tip 1: For Showers With Three Knobs
What does that do? Two out of three knobs in your shower are for temperature control. The third knob, however, should direct the water. Turning it one way should direct the water flow to the tub.
How do you fix a 3 way shower diverter?
Quote from the video:
Quote from Youtube video: Take the bowel to the hardware store and get the correct sized washer. It's a good idea to replace the screw tip. The screws size and threads can vary a good hardware store will stock. Them.
How do you fix a dripping bathroom faucet?
How To Repair A Leaky Bathroom Faucet
- Step 1: Find The Leak. …
- Step 2: Remove The Faucet Handle Cap. …
- Step 3: Remove The Handle. …
- Step 4: Remove The Retaining Nut. …
- Step 5: Pull Out The Cartridge. …
- Step 6: Remove The Seal And Spring. …
- Step 7: Reassemble The Faucet.
Why is my bathtub spout dripping?
A cracked or worn washer in the stem is a common source of a dripping bathtub faucet. Each time the water is turned on the washer is pushed against the valve. This repeated friction over time causes the washer to wear out. The tub faucet stem or cartridge itself may be the cause of the leak.
How do you fix a dripping 3 handle bathtub faucet?
Quote from the video:
Quote from Youtube video: When replacing the faucet seat you can remove and replace the seat with an allen wrench or a seat removal tool turn the seat counter clockwise to loosen clockwise to tighten tip.
What does a 3 function diverter valve do?
The three-way diverter allows you to alternate between any of your selected shower outputs by directing the water from the shower head to each additional accessory, one at a time. The diverter will not adjust the water temperature or turn the water off or on.
How do you fix a leaky shower mixer tap?
Quote from the video:
Quote from Youtube video: Give the handle a shake and pull that handle right off. The next is the cover. Place your water pump pliers over the edge of the nut. And gently. Turn it in the anti-clockwise.
How do you fix a leaky faucet with two handles?
Quote from the video:
Quote from Youtube video: We're going to take a look at our sink and see if that shut off the water to indicate which side is leaking push that back in shut the other side off. I'm going to take a look at our faucet. That's
How do you fix a leaky faucet stem?
Quote from the video:
Quote from Youtube video: Make sure you turn the water off take your handle. Off. Then you can remove the stem you'll need a crescent wrench or a pair of pliers. Once. You have the stem removed.
How do I fix my bathtub faucet?
Quote from the video:
Quote from Youtube video: And a pair of pliers to loosen the cartridge. And then your cartridge will pull. Out. You can take it with you down to the supply house match it up once you have your new one goes back into reverse.
How do you remove a bathtub nozzle?
Quote from the video:
Quote from Youtube video: The copper to remove the old tub spout first loosen off the set screw this set screw uses a 5 32nd allen key once the set screw is loosened the tub spoke should slide. Straight. Off.
How do you remove a bathtub faucet without set screws?
If there is no set screw, you have a threaded tub spout. You can remove your tub spout by twisting it counter-clockwise to see how your existing spout is threaded, if desired, but it is recommended you leave the spout on if you might need to use the tub before your new spout arrives.
How do you change a faucet cartridge?
Quote from the video:
Quote from Youtube video: Use a crescent wrench to remove the bonnet nut from the cartridge. Once the nut is off remove the cartridge if you need extra leverage. Use the pliers to pull on the stem.
How do I know what cartridge my faucet is?
Quote from the video:
Quote from Youtube video: Another quick tip is to look underneath the sink because sometimes you might be able to find a label that's attached to a supply line that will tell you the manufacturer.
How do I change the O-ring on my bathroom faucet?
Quote from the video:
Quote from Youtube video: Each oring using a flathead screwdriver or needle nose pliers. Apply silicone grease to the faucet spout base where the o-rings will be reinstalled slips.
