How do you wire a ceiling fan with 2 wires?
Quote from the video:
Quote from Youtube video: Together then the white wires. Together. Then connect the fans blue and black wires to the homes black and red wires. This configuration will run power to both your fan.
What do I do with the extra red wire in my ceiling fan?
A red wire up in the ceiling fan junction box usually indicates that the wiring has been installed which provides separate switch for the light and a separate switch for the fan motor. If your ceiling fan does not have a light fixture, then simply cap off the red wire and attach the fan motor to the black wire.
What do you do with green wire without ground?
What to do When there is Nothing to Attach the Ground Wire. When you have a ground wire and there is no place to attach it then place a wire connector over the end, coil up the ground wire and push it back into the electrical junction box.
What to do if there is no ground wire?
If the electrical box is not metal, then simply tape the end of the light fixture’s ground wire with electrical tape and let it float in the electrical box. Your only other alternative is to upgrade the wiring in the house, which will cost many thousands of dollars.
Can I connect red and black wires together ceiling fan?
Connect the red wire in the ceiling to the black wire in the light kit and the black wire in the ceiling to the black wire in the fan. Tuck the wires back into the box. Turn the power back on and test the fan.
Where do you connect the red wire on a ceiling fan with a remote?
Connect the red wire from the ceiling to the black wire in the fan. Cap off the black and white wire from the output side of the remote receiver module.
- So the white wire on the receiver is capped? …
- @user38908 The blue (or black depending on how you want it) coming out if the remote module would be capped.
How do you ground a ceiling fan?
Quote from the video:
Quote from Youtube video: And so you basically put your two wires. Together as close as you can put the wire nut over them and then screw it down holding both wires at the same time. And then screw that wire nut.
What happens if a ceiling fan is not grounded?
So if you wire your fan without the ground wire, it will still work properly. However, the added safety of the ground wire will not be present. If you decide to wire your fan without the ground proceed to the next step.
How do you connect a ground wire to a ceiling light?
If your light fixture has its own green ground wire you will need to connect the two ground wires using a wire nut. To use the wire nut simply insert the tips of both wires and turn the wire nut in a clockwise direction until tight.
What happens if the light fixture doesn’t have a ground wire?
If by chance you are installing an electrical light fixture that has no ground wire into an electrical box with no ground wire as well, then simply connect together the hot wire from the electrical box to the hot (black or red) wire on the light fixture.
Where do I connect the green ground wire in ceiling fan?
Get Grounded
You will also have a ground on the fan side. This may be a green wire coming from the fan motor or located on the mounting bracket. Alternatively, it might be a green screw inside the mounting bracket. If there’s a green wire, connect it to the house’s copper ground wire with a wire nut.
How do you ground a ceiling fan without ground?
Quote from the video:
Quote from Youtube video: When you don't have a wire coming in to hook your ground to what you do is you take your ground wire which is either a solid copper or green wire. You'll take that ground wire.
What if ceiling light is not grounded?
The main issue is the likelihood of a user touching something metal on the fixture that could be accidentally live. If the fixture is out of reach, the lack of a ground is probably a low risk. If it is a pull chain light, use of a string pull rather than metal is a good idea.
What is the purpose of a ground wire in a light fixture?
The purpose of a ground wire is to give excess electrical charges a safe place to go. The solid mass of earth below our feet has a negative electrical charge, which means positive electrical charges are naturally attracted to it.
Can I attach ground wire to mounting screw?
You attach the ground wire from the supply cable to the metal box. Always. If the lamp has a metal frame, and the box is metal, it can ground itself through the mounting screws. Otherwise you’ll need a 3-way pigtail between a pigtail off the box, the supply wire, and the lamp’s ground.
Why are there two ground wires?
The reason that wiring devices have grounding connections that accept only one wire is that otherwise, if two ground wires were connected to the device, then if someone later removed that wiring device and then re-applied power without wire-nutting the grounding conductors, there would be a break in the ground path for …
Can you connect 2 ground wires together?
The two ground wires must be wire-nutted together along with another 6-inch length of green or bare ground wire known as a pigtail. A grounded electrical outlet has three holes to provide a ground connection for three-prong plugged devices.
