How do you sand a floor under a radiator?
Quote from the video:
Quote from Youtube video: The radiator sander which is just my turn for it. This is the line the lag lurid line extension sander does a nice job of getting underneath the radiator inevitably it leaves something in the corners.
When should you stop sanding floors?
You really want to keep sanding until all marks and any shadows are completely removed. You need to sand your floorboards until they look brand new, even if you’re staining the boards (unless they’re going to be black or painted).
How long does it take to sand down hardwood floors?
It can take 1-5 days for a professional and 2-15 days for a DIY enthusiast, depending on the size and condition of the floor. For planning purposes, it would take 1-day per room for a professional and 2 days per room for a homeowner doing DIY.
How long does it take to sand and polish floors?
3 days
Floor sanding and polishing normally takes 3 days start to finish. However, the weather can make a big difference, so it’s always wise to check on day three and allow an extra day if it’s not quite dry.
What is a radiator edger?
It is a sander with an extended nose. The sanding disc is located about 10 or 12 inches from the motor. Its main use is to sand under areas where the edger cannot reach, like under radiators, baseboard heaters and cabinet toe-kicks are the most common areas.
How long does it take to paint a radiator?
Time needed: 2 hours. A step-by-step guide to paint radiators. It may sound obvious, but before you begin to paint your radiator you must be sure it is off and completely stone cold.
How do you protect walls when sanding floors?
Masking tapes prevent your skirting boards, beadings, walls, doors, door frames and fireplaces from being damaged, scratched or stained while our experts are sanding, staining and finishing the wood flooring. The standard masking tape usually used for these purposes is made of paper.
How much wood is removed when sanding hardwood floors?
about 1/16 inch
Floor sanding removes at most about 1/16 inch of wood, and damage that is deeper than that usually will still be evident, though less obvious.
Can I use a belt sander to sand floorboards?
Sanding in general
When dealing with larger floor areas, it is better to use a belt (or drum) floor sander (illustrated right) for the main area of the floor and then using a handheld rotary sander to sand the areas around the edges and corners where the belt sander cannot reach.
Can you stay in your house while floors are refinished?
If your hardwood floors have been sanded and finished with Bona Mega Clear HD, it is safe to sleep in the home about 2-3 hours after the project is finished, but again, only if there are other rooms that have not been robbed of their furniture – furniture should stay off floors for at least 24 hours after ANY project …
Can you walk on sanded floors?
Your floor can be walked on with stocking feet in 3-4 hours and furniture can be placed back on the floor (not dragged) in 48 hours. Area rugs can be put down in one week when the finish is fully cured.
How long do you have to stay off hardwood floors after refinishing?
How long do I have to wait to use my room after my floors are refinished? We recommend waiting 6 hours before walking on your new floors in socks. After 24 hours you can walk through with shoes on.
Can you sleep in house after water-based polyurethane?
No, it is not recommended, and you shouldn’t take chances. Polyurethane will be off-gassing heavily for the first 24 hours, even for the water-based type. It is worse if you use oil-based finishes: it’s highly toxic and can cause several health problems.
Is two coats of polyurethane enough on hardwood floors?
Oil-based polyurethane will rarely need more than three coats on floors. Hardwood floors are high traffic areas, so you need a nice, thick layer to protect the wood for years. On the other hand, when using water-based polyurethane, you might need to apply four or five coats.
How long are polyurethane fumes toxic?
How long are polyurethane fumes toxic? The toxic smell of polyurethane takes about five to seven days to decrease. However, you’ll still notice a bit of the odor here and there for about three weeks in the case of water-based polyurethane and four weeks for oil-based poly.
Can the smell of polyurethane hurt you?
When not fully cured, Polyurethane fumes have several side effects such as asthma and difficulty breathing for people with respiratory conditions. The polyurethane fumes can also cause irritation of the eye, nose and throat; vomiting; headaches; shortness of breath and dizziness.
Are floor refinishing fumes harmful?
Many common products used to refinish wood flooring contain harmful chemicals known as volatile organic compounds, or VOCs. The off-gassing from these chemicals pose a variety of long-term and short-term health effects—from headaches and nausea to damage to the liver, kidneys and the central nervous system.
How do you get rid of polyurethane fumes?
Place several bowls in the affected room and fill them with water. Put half an onion in each dish, with the cut side facing up. Onions are one of the best natural ways to absorb unwanted smells. If you are gone for a few days, replace the onions with fresh ones each day.
Is polyurethane toxic to breathe?
Respiratory Issues First, polyurethane is a petrochemical resin that contains known respiratory toxins called isocyanates. When left uncured, polyurethane can cause asthma and other breathing problems.
Is it safe to use polyurethane indoors?
Can You Use Polyurethane Inside or Outside? Most exterior polys can be used indoors, but interior polys should never be used outdoors; they lack the additives that protect exterior finishes from UV rays.
