I would be considering two options:
- using larger screws into the stud.
- gluing a dowel into the hole in the stud, even drilling out the hole to 6mm or 8mm and then, once the glue is dried drilling a pilot hole for the new screws.
How do you fix a screw hole that is too big?
Use Filler to Fill the Screw Hole
- Fill the hole with liquid glue — For this, you can use wood glue or Elmer’s glue (Amazon affiliate link). …
- Fill stripped out the hole with toothpicks — Yes, toothpicks! …
- Start anew with your screw — Now that the hole is filled, you can completely start fresh and redrill the hole.
How do you make a screw hole smaller?
2) Not to be used on screw holes that hold any great weight, but a quick and simple fix for smaller screw holes is wedging a shim mixed with wood glue into the hole. For the shim you can use toothpicks or matchsticks. Once the glue has set simply cut off the shim so that is flush with the edge of the wood.
How do you fill a Redrill screw hole?
Using wood fillers (such as FamoWood or Elmer’s) is one of the best among all the methods as they can easily cover the old holes, cracks, and gaps permanently. These wood fillers make the wood so hard that you can redrill or screw it into them without damaging the wood itself.
How do you fill large screw holes in wood?
Use the tip of a putty knife to fill the wood filler into the screw hole. Fill the screw hole to the level of the wood surface. Press the filler with a putty knife, So that the filler is completely filled in the hole deeper. Wood dries very quickly, Do not take more than 2 to 3 minutes to fill a hole.
