3 Answers

  1. Get a 2-gang box to replace your existing 1-gang box.
  2. Get a new switch.
  3. Remove your existing box and install the 2-gang box in its place.
  4. Run your supply hot wire to both switches.
  5. Connect the light/fan hot wire to one switch and the exterior light to the other.
  6. Join all neutrals and ground wires.

Can two lights be controlled by one switch?

The answer is yes; one switch can turn on multiple lights. You can use two ways to make your switch control multiple lights. The most common way is to daisy-chain the light fixtures through connecting them with each other and hooking the first fixture to the switch.

How do you convert a single light switch to a double?





Quote from the video:
Quote from Youtube video: So what i did here is put some tape on the wall i take an old work double gang. Box. And i flip it upside down and basically i want to trace the remaining. Space on the wall. So i cover the hole.

Can you split a light fixture?

It’s not important to think too much about parallel versus series wiring when adding a light to a circuit, though. All you have to remember is that you have to create pigtails at the existing fixture to split the electrical path in two, and that’s pretty easy to do.

How do you connect two lights to two switches from one power source?

Quote from the video:
Quote from Youtube video: So one cable supplying these two switches this is already set up for from a different model for a different power source.

How many lights can you have on one switch?

A regular 15A circuit can have up to 1400W of lights connected, or one 1400W light or 14 100W light bulbs. Most homes allow for 23 to 40 60-watt bulbs or 280 to 480 5-watt LEDs.

How do you wire a light switch for multiple lights?





Quote from the video:
Quote from Youtube video: The correct wire to use at the switch will be the wire coming from the second switch. The remaining two neutral wires one coming from the power source and the other from the light fixture.

How do I add a second light to an existing switch?

Quote from the video:
Quote from Youtube video: We're going to run it. Through these joists here by drilling holes through.

How do you tap an existing wall switch?

Quote from the video:
Quote from Youtube video: You always want to grab a top and bottom loosen the screws. And then pull the switch all the way forward everything's been removed from the wall. And there's three screws on the switch.

How does a double switch work?

A double-switch allows you to operate two lights or appliances from the same location. Double switches, sometimes called “double pole,” allow you to separately control the power being sent to multiple places from the same switch. For example, you might want to turn on a bathroom light separately from the ceiling fan.

Can you daisy-chain light switches?



Daisy chaining is a simple way to connect two or more light fixtures. Multiple light fixtures operated by a single switch can be most easily wired through a process known as “daisy chaining.” This is a simple, serial wiring scheme that connects the wires of the light fixtures one to the next in a single circuit.

Can I take power from a light switch?

Switch boxes can sometimes be used as a power source for a new outlet, but only if the box is large enough and has neutral and ground wires running through it.

What is a double pole switch?

What is a double pole switch? Double pole switches are connected to two separate electric circuits. They essentially contain 2 switches which are linked together and can complete the circuit either simultaneously or staggered.

How do you daisy-chain lights together?



Quote from the video:
Quote from Youtube video: Cover you can just set it over the wires. And pop it in place. That's another way to just get out of some more work. We hope this is clarified some of the questions.

How many LED can lights can you put on one circuit?

Each CFL or LED bulb typically gives the same amount of light as a 60-watt incandescent bulb while drawing 10 watts or less, which is equivalent to a current draw of 1/12 amp. Thus a 15-amp circuit can safely control 180 or more fixtures that use CFL or LED bulbs.

How do you wire multiple LED lights together?

Quote from the video:
Quote from Youtube video: Let's start off by taking a look at what it means to connect LEDs in a series connection in this basic setup the power is actually going to flow from positive to negative through each LED.

Should LED lights be wired in series or parallel?

series-parallel



Generally speaking, most LED lighting uses a series-parallel combination. Ideally, for reliability and lighting consistency, it would be best to have one strip of LEDs all wired in series to a constant current driver.

Can you connect LED lights together?

There are two main ways to connect LED strip lights together. They consist of a gapless pin connector and a jumper connector . Each allow you to connect two sections of low voltage strip lights together without soldering.

How do you wire a series of lights?

Quote from the video:
Quote from Youtube video: Now going from the first light box to the second light box is a 12 2 with ground going from the second light box to the third light box is a 12.2 with ground cable.

What happens when you wire lights in series?

Wiring lights in series results in the supply or source voltage being divided up among all the connected lights with the total voltage across the entire circuit being equal to the supply voltage. For many reasons, in practice this type of series connection is not done.

What happens when you connect lights in series?



A series circuit can be constructed by connecting light bulbs in such a manner that there is a single pathway for charge flow; the bulbs are added to the same line with no branching point. As more and more light bulbs are added, the brightness of each bulb gradually decreases.