How much of a difference does adding insulation make?

One of the places in your home where a little bit of attention can make a big difference in your comfort — and heating bill — is the attic. According to the Department of Energy, properly insulating the attic can save 10 to 50 percent on a typical heating bill.

What R value should you have in the attic?





Insulation levels are specified by R-Value. R-Value is a measure of insulation’s ability to resist heat flow. The higher the R-Value, the better the thermal performance of the insulation. The recommended level for most attics is to insulate to R-38 or about 10 to 14 inches, depending on insulation type.

Can I put too much insulation in my attic?

It’s possible to over-insulate an attic as too much will cause moisture buildup and eventually result in mold. Eventually, adding more insulation leads to diminishing returns in trapping heat as well.

Is R 13 insulation Good for attics?

Depending on where you live and the part of your home you’re insulating (walls, crawlspace, attic, etc.), you’ll need a different R-Value. Typical recommendations for exterior walls are R-13 to R-23, while R-30, R-38 and R-49 are common for ceilings and attic spaces.

Is R30 insulation Good for attic?

The average recommended level is 14 inches of R49. In Zone 2, the average minimum requirement for attic insulation is 9 inches of R30 fill. The average recommended level is 17 inches of R60. In Zone 3, the average minimum requirement for attic insulation is 9 inches of R30 fill.

Is R19 insulation Good for attic?





Attics. Unless you add additional layers, R-19 insulation is not recommended for use in attics.

Is R60 attic insulation worth it?

Recommended R-Value Varies by State
You need exactly as much as the area you live in determines. Here, where temps get pretty hot for much of the year, attics should have from R30 to R60 (average is R38). Those living up north want anything from R49 to R60. This helps insulate against the extreme cold weather.

Will more attic insulation help with cooling?

A properly insulated attic can benefit your home in many ways, beside just keeping the home at a comfortable temperature year round. The short answer, yes, insulating the attic is an effective way to keep your home cooler during the summer months.

When should attic insulation be replaced?

15-20 years



However, due to its construction with natural materials, eventually the product will lose effectiveness. Fiberglass insulation typically needs to be replaced 15-20 years into it’s life, as it can easily become dirty, wet, moldy, and ineffective if there’s a roof leak or water damage of any kind.

Is higher R-value better?

The R-value for insulation is a way to measure how much resistance the insulation has to heat flow. The higher the R-value, the more the resistance and the better the material is at insulating a home.

Is R30 insulation good for attic?

The average recommended level is 14 inches of R49. In Zone 2, the average minimum requirement for attic insulation is 9 inches of R30 fill. The average recommended level is 17 inches of R60. In Zone 3, the average minimum requirement for attic insulation is 9 inches of R30 fill.

Is R 19 insulation Good for attic?



Attics. Unless you add additional layers, R-19 insulation is not recommended for use in attics.

Is R38 insulation good?

That’s the 2nd Law of Thermodynamics. Choose R-38, and that same house will likely realize heat gain through the ceilings every sunny afternoon during summer. In the winter, it’s just as powerful. Only your R-38 is trying to slow the flow of heat loss, as hot always moves to cold.

What type of insulation is best for attics?

Spray foam offers the best attic insulation performance available. Choose from two types: closed-cell and open-cell, aka 2-pound and ½-pound, respectively. They sport insulation values of approximately R-6.5 and R-3.6 per inch, respectively.

Will insulating attic keep house cooler?

A properly insulated attic can benefit your home in many ways, beside just keeping the home at a comfortable temperature year round. The short answer, yes, insulating the attic is an effective way to keep your home cooler during the summer months.

Is blown-in insulation better than rolls?



The Differences Between Blown-in and Rolled Insulation
In terms of R-value, they tend to be equal, although you can choose rolled insulation with varying R-values depending on your needs and your budget. The lower the R-value is, the less effective it will be as insulation – although it will be cheaper as well.

Can you over insulate a house?

It is possible to over-insulate your house so much that it can’t breathe. The whole point of home insulation is to tightly seal your home’s interior. But if it becomes too tightly sealed with too many layers of insulation, moisture can get trapped inside those layers. That’s when mold starts to grow.

Does extra insulation really help?

Unless your home was specially constructed for energy efficiency, you can probably reduce your energy bills by adding more insulation. Many older homes have less insulation than homes built today, but even adding insulation to a newer home can pay for itself within a few years.

How many inches of insulation should I have in my attic?

According to the U.S. Department of Energy, it’s recommended that attics have an R-38 to R-49, or about 12” to 15” of fiberglass or cellulose insulation. Use unfaced insulation when adding more insulation to an attic that already has some insulation, laying the rolls or batts at right angles to the floor joists.