Then, after hanging, when you tighten the screws on the wall, the shelf will get pulled tight without any gaps. It looks as if the keyhole slots for the shelves have the narrow slot in the back. In that case, the shelves lock in by sliding back, so mounting the brackets on the wall first should work.

Do I put brackets on the shelf or wall first?

Plan Shelf and Bracket Placement



On drywall, the brackets should be secured to the wall studs, so the bracket locations should line up with your marked wall studs. Use a level to make sure your planned bracket locations are along a straight, level line. This will ensure your shelves are level after installation.

Does the long part of the bracket go on the wall or shelf?





The long part goes against the wall, under the shelf. The length of the actual bracket under the shelf should be three quarters the width of the shelf.

Where should brackets on a shelf go?

You should fit shelf brackets with the longer arm against the wall and the shorter one under the shelf. Remember, the length of the longer arm will show you how closely you can fit the shelves on top of each other.

How far should shelves hang over brackets?

Shelves should overhang the side brackets by no more than 6 inches. So, for example, if you plan to use three standards spaced 32 inches from each other (total span of 64 inches from end to end), you can safely use shelves that are as much as 76 inches long (or a standard 72-inch, 6-foot-long board would work fine).

How do you install shelving brackets?


Quote from Youtube video: Then just scoot your standard over making sure that it's in place. Then take a level and lay it across the top of both of the brackets. Now just move this standard up and down until it reads level.

How do you hang anchors with shelves?





How to Hang a Shelf with Anchors

  1. Select the Appropriate Hangers. Choose appropriate hangers and attach them to the shelf. …
  2. Mark the Holes for the Hangers. Lift the shelf unit against the wall and move it to the position you want it to occupy. …
  3. Drill the Holes. …
  4. Attach the Anchor. …
  5. Attach the Shelf. …
  6. Level the Shelf and Secure It.


How many brackets do I need for a 36 inch shelf?

2 brackets

DETERMINE HOW MANY BRACKETS ARE NEEDED



Of course, all shelves are different, but if your shelf is over 36” long, we suggest using more than 2 brackets.

Do shelf brackets need to be in studs?



As a general rule, it’s always ideal to install shelf brackets into wall studs. However, it can be difficult to install brackets directly on a wall stud In that case, we recommend using a toggle anchor (which are available for purchase here).

What size brackets for 12 inch shelf?

The length of the protruding leg must be at least two-thirds of the depth of the shelf. For example, if the desired shelf is 12 inches deep, the supporting legs of the bracket must be at least 8 inches. Usually, both legs of the brackets are the same length; but this is not a hard rule.

How long can shelves be without support?

The span limit is defined as the maximum distance apart that you can place the shelving supports. Glass, particleboard, solid lumber, plywood, and other common shelving materials can have span limits that can range from 18 inches to almost 5 feet.

How do you hang floating shelves with brackets?



Quote from the video:
Quote from Youtube video: The mounting holes in the wall. If the shopping bracket can't be screwed directly to the wall studs bore a hole through the drywall or plaster. And insert one of these hollow wall anchors.

Can you use brackets with floating shelves?

Drill bracket holes in DIY floating shelf



Place your floating shelf on top of the wall brackets exactly how you want it to be once installed. Mark with a pencil the center point over the bracket. Then, mark the center point of this location on the shelf edge where the holes will be drilled.

Can you put brackets on floating shelves?

You can choose to use brackets specifically designed for floating shelves, making them invisible to the eye. You can also build your own hollow shelf and then slide it right on to a wooden cleat.