https://youtu.be/2JaRSIyKj38

Do you need to change the transformer for LED lights?

They will have a transformer either in the ceiling or light fitting. Some LED bulbs, like the Philips Master LED range, have in-built circuitry that can deal with most (but not all) transformers, so you don’t have to change them.

Can I use an LED driver as a transformer?





LED drivers and electronic transformers for retrofit LED lighting are not interchangeable. They differ in output and load compatibility i.e. which LED lights they will work with. The fundamental difference between the two is that LED drivers output DC while electronic halogen transformers output 12VAC.

Can I use a driver instead of a transformer?

Depending on the specifications of your LED light strip or lighting setup, and LED driver or electronic transformer may be used. But, LED drivers are the preferred choice for ensuring optimum dimmability and extended lifespan of LEDs. Moreover, newer electronic transformers also allow for TRIAC dimming.

Are LED drivers and transformers the same?

Some people use the word driver and others use the word transformer. At InStyle LED they are both exactly the same thing. They are a product that transforms mains 240v down to either 12v or 24v to run the LED tape.

Do all LED lights need a driver?

Do all LED lights need a driver? All LED strip lights should be connected to a driver. The only exception is LED lighting that is specifically developed to be controlled by a mains power supply such as mains voltage tape or LED bulbs.

Can I use a 12V halogen transformer for LED lights?





A halogen transformer won’t work with your new LED bulbs most of the time, although it’s worth checking. Transformers for halogen bulbs have a minimum and maximum threshold for the bulb, and LEDs will often come in under than minimum.

Why transformer is used in LED driver?

All in all, an LED driver is a high-frequency switching power supply circuit manufactured to convert power and prevent fluctuations. Telecom applications require LED drivers. These drivers in turn require ferrite transformers for working.

When should I use LED driver?

In the instance of a change in voltage (power), an LED driver would protect an LED bulb from any electrical current fluctuations. These fluctuations can cause a light bulb to vary its light output (brightness), or cause the LED bulb to overheat. An LED Driver is vital to the safety of the bulb.

Do you need a special transformer for LED landscape lights?

In the world of low voltage landscape lighting, LED lamps have also become prevalent. In fact, they have allowed us to create larger lighting systems, often, without the need for larger transformers.

Do 12v LEDs need a driver?



Because LEDs require a constant DC of 12v or 24v, LED drivers are required in all LED systems (except those which are specifically developed to be controlled by mains voltage power supplies such as mains voltage tape or LED bulbs).

How do I choose an LED driver for my LED?

Use an LED driver with at least the same value as your LED(s). The driver must have a higher output power than your LEDs require for extra safety. If the output is equivalent to the LED power requirements, it is running at full power. Running at full power may cause the driver to have a shorter life span.

Why do LED drivers fail?

The LEDs usually fail, because they have been connected to a constant LED driver in parallel. If the LEDs have failed you may want to also replace the LED driver. We usually recommend using a model with an adjustable output, and trimming down the output voltage slightly, to avoid over powering the LEDs. 5.

What should I look for in an LED driver?



5 Important Factors When Buying LED Drivers

  • Output Voltage / Current. First, consider the voltage requirements of your light. …
  • Input Voltage / Current. Next, consider the voltage supply of the location you’ll be using your light. …
  • Max Wattage. Lastly, consider the wattage requirements of your light. …
  • IP Ratings.


How do I choose a replacement LED driver?

Quote from the video:
Quote from Youtube video: You have to replace the entire fitting. So how do you know what LED driver you need here are four golden rules to follow when choosing your LED driver first. And foremost you need to know if your LED

Are all LED drivers the same?

Unlike fluorescent ballasts, LED drivers are not standardized, so they are not interchangeable. They can vary in terms of output characteristics, electrical safety rating, input voltage, programmability, temperature rating, electromagnetic interference (EMI), dimming interface and form factor.

How do you diagnose a bad LED driver?



Use a voltmeter and measure the output voltage of the LED driver. Constant current LED drivers may be at an exceedingly high voltage, so be careful. If the LEDs have failed the output voltage of the LED driver will be at its rated output (maximum voltage output for a constant current LED driver).

How long do LED drivers last?

Namely, the life of the driving circuit expires prior to when the LED stops emitting light or has its brightness dropped. The typical nominal lifetime of these elements is often times less than 25,000 hours, while the lifetime of LED itself could be as long as 50,000-100,000 hours.

Can LED drivers fail?

It is very rare that agood quality LED driver fails because of a manufacturing fault. In most cases the failure is caused by a problem with the installation, or there are some environmental factors at play.

Do LEDs have a longer life span?

Because LEDs are as much as 90% more effective than incandescent light bulbs, they have a much longer lifespan. This is because they have no working parts that will burn out or break over time.