No. You must not put two gfci devices in series; this will likely cause all kinds of strange intermittent faults. Use a regular breaker, and do not daisy chain gfci outlets… use one gfci and regular outlets for the downstream circuit.
Do bathroom lights need to be arc-fault protected?
AFCI protection is not required for outlets located outside or in garages or bathroom areas. (B) All 15A or 20A, 120V branch circuits supplying outlets in dormitory unit bedrooms, living rooms, hallways, closets, bathrooms, or similar areas.
Do you need AFCI breaker for lights?
Additional Requirements
The NEC requires that virtually all branch circuits for lighting and receptacles in a home must have arc-fault circuit-interrupter (AFCI) protection. This is a form of protection that guards against sparking (arcing) and thereby reduces the chance of fire.
Can I use AFCI instead of GFCI in bathroom?
The reason AFCI’s aren’t required in the bathroom is a bit obscure. AFCI’s are subject to nuisance tripping, and when people get fed up with the nuisance tripping, they often replace the AFCI/GFCI breaker with an ordinary one, losing the ground fault protection.
Can GFCI and lights on same circuit?
Electrically there is no problem with powering the light with the hot and neutral feed to the GFCI receptacle. You could use pigtails to the receptacle line (and not use the load connection) and to the light switch so the lights would’t go out if the GFCI receptacle tripped.
Can the outlets in a bathroom be on the same circuit as the lights?
No lighting outlets or other equipment can be fed from the same circuit feeding the bathroom receptacles. For example, a one-family dwelling has two bathrooms and a duplex receptacle has been installed in each. One 20-ampere branch circuit can supply power to both bathroom receptacles but cannot feed anything else.
Can AFCI be used in a bathroom?
Note: Arc-Fault Circuit Interrupters (AFCIs) requirements have not expanded to the entire dwelling unit (to include bathrooms, basements and crawl spaces).
What requires AFCI breaker?
AFCI protection is currently required for all 15 and 20 amp branch circuits providing power to outlets* in residential family rooms, dining rooms, living rooms, parlors, libraries, dens, bedrooms, sunrooms, recreation rooms, closets, hallways, and similar rooms or areas.
Where are AFCI and GFCI required?
The latest National Electrical Code requires both AFCI and GFCI protection only in kitchens and laundry rooms. And within those rooms, the Dual Function AFCI/GFCI Receptacle provides what is called “feed-through” protection, which means it provides protection for all wiring and extensions attached to the load side.
Where do you have to use AFCI breakers?
AFCIs are required on all 120-volt, single-phase circuits with 15 to 20 amps supplying receptacles in all dwelling rooms. If, for example, if you use your basement as a living room, playroom, or recreational room, then you will need to install an AFCI protection. However, basements (garages, attics, etc.)
Will LED lights trip a GFCI?
Electrical Problem with an LED Light Tripping a GFCI Outlet
The GFCI Outlet must be wired from the wiring of the same circuit, therefore the wiring must be contiguous, and not connected to other circuit wires because this could cause the GFI Outlet to trip, but there is more to this problem as described below.
Should lights be on a GFCI?
So, to answer my original question: yes, outdoor lights need to be plugged into GFCI-protected receptacles. On top of this, one GFCI receptacle is required at the front and back of the home, at a maximum height of 6 feet 6 inches off the ground. One receptacle is also required on each patio, deck, porch, or balcony.
Can you power a light switch from a GFCI outlet?
In general, yes. GFCI outlets have LINE and LOAD terminals. You can connect several more outlets on the LOAD terminals, and they will also be protected from ground faults. You can also add a switch, though bear in mind that highly inductive loads (like a large motor) can cause nuisance tripping of the GFCI.
Do garage lights need to be AFCI protected?
The 2017 National Electrical Code (NEC) requires the protection of an arc fault circuit interrupter (AFCI) for 15 and 20 amp circuits in all newly built residential areas, but they are not needed in bathrooms, garages, or outdoor areas.
Do garage lights need to be arc fault?
The shorter list is areas not requiring AFCI protection: unfinished basement areas, attached or detached garages, outdoor lighting and receptacles, accessory buildings and bathrooms are not required to be fed via AFCI protected circuit.
Are AFCI breakers required in older homes?
According to the NEC, AFCI protection is necessary for 15- and 20-ampere branch and 120-volt, single-phase circuits for devices and outlets. Older and historic homes may not require these breakers, but experts still recommend them. Newer homes should have AFCIs in compliance with NEC guidelines.
Does a fridge need arc fault?
The answer is yes, circuits that supply outlets for fridges need to be protected from damage. If your state still uses NEC, there are a few rooms where it is not required.
What appliances require AFCI?
In some areas, any circuit that is served by a plug-in receptacles or wall switches requires AFCI protection, while elsewhere, the requirement is for AFCI protection for all 15-amp or 20-amp circuits, even those serving only hardwired appliances.
Does dishwasher require AFCI?
Is AFCI required on a dishwasher circuit? Under most circumstances I would say yes, it is in the kitchen and under 210.12(A) an area that has to be provided with arc fault protection.
Does microwave circuit need AFCI?
A dedicated 20-amp circuit is needed to feed the microwave oven. Since the appliance is plugged into an outlet, AFCI protection is required.
Does a microwave outlet need to be GFCI?
A GFI or GFCI outlet is needed if the microwave is located less than 6 feet from a water source such as the edge of the sink, toilet, shower, etc. It is also needed if located outdoors, garages, kitchen counter tops, near laundry, utility sinks, wet bar sinks and near swimming pools.
Why is my microwave tripping the arc fault breaker?
The breaker trips because the oven is getting damaged by arcing. This is correct behavior. Running microwave underloaded is incorrect behavior.
Why does my microwave keep running when I close the door?
If your microwave turns on by itself after you close the door you may need to clean the door, check the latch, or ensure that the door is closed all the way. But if your cooktop lamp will not turn off, then it may just be wet from recent cooking. Follow this guide to get things back to normal.
Why does my microwave keep popping the breaker?
When an appliance such as a microwave oven repeatedly trips the circuit breaker, it’s overloading the electrical circuit, which is rated to handle a finite number of amps. Once the microwave exceeds that number the breaker is tripped and the electrical flow is shut off.
