No, there should not ever be two traps on a single drain line. The point of the trap is to create a water barrier which prevents sewer gasses from coming up the empty pipe and into the house.

Can you have two traps under kitchen sink?

It is perfectly fine to have (2) “P” traps , one on eash sink of a (2) sink setup. As long as the “P” traps are not Double Trapped ( more than one trap serving a fixture ) then it is fine as long as the weir is sized correctly.

Can you have 2 pea traps?





Yes, in most every home, multiple P traps eventually go into a single drain.

Do you need 2 traps for a double sink?

A double bathroom sink installation rarely requires more than one P-trap. The usual practice is to connect the two sinks to a tee and then feed the tee into a single P-trap, which then connects to the drain. The pipes you use to connect the sink to the P-trap are the same type the P-trap is made from.

Why is s trap not allowed?

The “S” trap is prohibited under the Uniform Plumbing Code throughout the United States. This is because the “S” trap will siphon or suck water out from the trap which will end up releasing methane (sewer) gases into the home.

Why are there 2 drains under kitchen sink?

In two drain line systems, one of the drain lines disposes of garbage water. The other one is installed as a vent. By the plumbing rules, the left drain is used as a vent. Comparing it with a single drain line system this vent is not needed anymore.

Does each sink need its own P-trap?





Each sink will need its own drain. But two sinks don’t need their own p-traps. It is common practice for them to share one trap.

Can I use S-trap for sink?

Quote from the video:
So the reason why this is a banned in all 50 states being this by the way it's in the uniform plumbing code it is a code violation.

Does an S-trap need a vent?

Without a vent, an S-trap can allow the water in the fixture to drain so quickly that it often siphons the trap dry and exposes the room to sewer gases.

Is a vented S-trap OK?

Venting Issues



You can’t vent an S-trap in this way because it drops immediately to the drain. If you run water through an unvented S-trap, the vacuum created in the pipe can pull water out of the trap, rendering it useless.

Which is better S-trap or P trap?



P-traps are generally considered by most to be more effective and consistent in maintaining water trap compared to S-traps. Their design makes them less vulnerable to drying out and losing seal: a properly installed P-trap will never lose its water seal.

What is difference between P trap and S-trap?

Both types of traps are intended to do the same thing, which is to provide a water barrier between the inside of your home and the sewer. P-traps were designed to eliminate the main issue with s-traps, which is that they tend to siphon away too much waste water, leaving the drain “dry”.