If you can remove it try to clean the inside of the valve body with a de-calc product and a stiff brush to remove any build-up. Be careful of any o-rings that might be there although they should come out with the cartridge. If this doesn’t work you might have to replace the diverter.
Why does my shower diverter not work?
The most common issue with a shower diverter is when water comes out of both the tub faucet and the showerhead. Check to be sure there is no residue clogging the shower diverter lever from fully lifting or lowering. If everything looks clear, the problem could be worn-out parts in the shower diverter valve.
How do you fix a shower diverter pull up?
Quote from the video:
Quote from Youtube video: And pulling up on the diverter. Knob once that comes off all of the parts will come loose. So we'll take a look inside the tub spout in a little bit but first let's check out the washer.
How do you fix a shower diverter push button?
Quote from the video:
Quote from Youtube video: And water just started squirting out at hole so something's broke or rusted off we'll take it apart and replace. This thing they're not too difficult so I already loosened everything to speed along
How do you fix a faulty diverter valve?
How to Repair a Shower Diverter
- Turn off the water supply to your shower.
- Seal off your drain with tape so that small screws or other important parts are not lost down the drainpipe.
- Tighten the screws behind the faceplate of the diverter valve. …
- Disassemble the shower diverter. …
- Replace the diverter.
How do I know if my shower diverter is bad?
First, if the valve is engaged but water continues to come out of the tub spout only, the gate is severely damaged or has fallen out completely. Second, if the valve is engaged but the showerhead experiences low water pressure and water continues to drip from the spout, the gasket has failed or is starting to fail.
How do I know if my diverter valve is working?
If your hot water tap is only releasing lukewarm water, you may have a stuck valve. The valve is allowing some hot water through but not enough to make the water hot instead of warm. This is one of the most common signs that your diverter valve is faulty.
Can a shower diverter be repaired?
It may be a simple job to put off, a damaged shower diverter wastes water and creates a bad shower experience. Repairing a shower diverter is a DIY job that you can complete in simply one day.
How do you fix a 3 way shower diverter?
Quote from the video:
Quote from Youtube video: Set the screw in a safe location. And we can pull the cap off now see how easy that was chances are yours might not be that easy yours might be very rusted corroded and oxidized.
Can you use wd40 on shower diverter?
Hard water can build up and deposit in your tub spout diverter, causing it to clog. Spray some WD-40 with the spray nozzle pointed upward into the spout to the diverter valve to lubricate it. Do this a few times and it should clear any clogs.
Can a shower diverter go bad?
It does exactly what it’s named for: it diverts (changes direction) water from one place to another. The only problem with shower diverter valves is they don’t last forever, and there are many times—like all of the other components of your home—when they fail from old age and normal wear and tear.
When should I replace my shower diverter valve?
If your shower won’t switch from the tub’s spigot to the showerhead at all, this also could mean you need to replace the diverter valve. If you’re not sure what a diverter valve is or what it does in your shower, make sure to take a look at our post about everything you need to know about shower diverter valves.
How do you fix a bathtub diverter?
Quote from the video:
Quote from Youtube video: But you might be able to just take a pair of pliers. And another pair of pliers. And hold the post while you unscrew. This probably the second easiest way is just to take a hacksaw blade.
How does a shower diverter valve work?
When the diverter valve is open, water flows directly through the faucet and into the tub. However, when you want to take a shower, you lift the knob or lever to close the diverter valve. This creates pressure, forcing the water flow upward and out of the showerhead.
Can you replace a tub spout diverter?
Quote from the video:
Quote from Youtube video: Inside there that's personal preference the next piece is this piece right here. And this is what your rod grabs a hold of inside your spout. And this rubber little grommet gasket has to be in there.
Are all shower diverters the same?
There are three different types of shower diverters:
After you find the right combination of hot and cold water, you turn the third handle clockwise to send the water to the showerhead. When you’re done showering, turn the handle counter-clockwise to redirect the water to the tub.
