How do you remove an old shower drain flange?


Quote from Youtube video: Pipe you can pull up the entire unit you could try to wiggle. At that gasket out with a needle nose pliers. And a flat head screwdriver.

How do you remove a screwless shower drain cover?





Quote from the video:
Quote from Youtube video: One get yourself some wd-40 spray it around the rim of the drain. Let it sit for about 15 minutes or so and then get yourself some pliers that fit into these holes in the drain.

How do you unscrew a shower drain?

Quote from the video:
Quote from Youtube video: And turn tub spouts. And what we're gonna do is we're just gonna lift it up and we're gonna unscrew it and see what's going to happen if you unscrew it from the very top. We're gonna end up just

How do you remove a PVC shower drain flange?

Quote from the video:
Quote from Youtube video: Looks like just a straight little bar with a little like Nike edge on it but. This works just as good. So I got a little Dremel. And you see what's happening I just insert.

How do you remove a solvent weld shower drain?

REMOVAL OF EXISTING SHOWER DRAIN BODY

  1. Remove drain cover with flat blade screwdriver.
  2. Remove the crown nut by unthreading it using needle nose pliers.
  3. Extract the compression seal exposing drain pipe and shower drain body.
  4. With mini hacksaw, make two vertical cuts approximately 1” apart through drain body.

How do you remove cast iron shower flange?





Quote from the video:
Quote from Youtube video: Now we're going to go heat it from. Below. There there we go there got rid of the hold basically split that right there the chisel. And that popped right up. Okay now that we got that lead ring. Out.

What dissolves hair in shower drain?

Use Baking Soda & Vinegar Before Plunging It Out: Baking soda and vinegar can be an extremely effective way of dispatching many clogs, and hair clogs are no exception. For best results, start by squirting a little dish soap into your drain, followed by a cup of vinegar and a cup of baking soda.

How do you get rid of hair in the shower drain home remedies?

Mix together 1 cup of vinegar (distilled white vinegar works best) and 1 cup of baking soda. First, pour boiling water down the drain to loosen; then follow with the baking soda-vinegar mixture and wait 15 minutes. Rinse with more boiling water.

How do you take apart a PVC shower drain?

Quote from the video:
Quote from Youtube video: Put the screwdriver against it wrap the top of it with your hammer just gently work your way around and you'll feel it start to give once you get it going and get it broke free.

How do you remove a plastic shower drain?



Hold the stopper body in place and unscrew the top knob (counterclockwise) with pliers and a rag or rubber grippy to prevent scratching. Unscrew the brass insert beneath with a flathead, then lift the stopper. From the open position, lift and look for a set screw. If no screw, simply turn counterclockwise to remove.

How do you replace the rubber seal on a shower drain?

  1. Remove the Drain Cover. To begin, remove the metal drain cover from the drain. …
  2. Discard the Compression Gasket. …
  3. Remove the Shower Drain Body. …
  4. Clean the Rim of the Drain. …
  5. Install the New Gasket. …
  6. Screw-in the New Shower Drain Body and Seal It With Putty. …
  7. Remove Any Excess Putty From Around the Drain.
  8. Can I use silicone on tub drain?

    In case you find it challenging to reach the underside area of the tub drainage pipe, then your best option will be silicone caulking. Use the caulk to seal the exposed drain area. Silicone caulking forms a strong, tight seal that doesn’t wash away easily.

    How do you remove an oatey square shower drain cover?

    Quote from the video:
    Quote from Youtube video: And your drains probably already install. So just put it in one through one of the holes on the corner snap. It right off grab your drain cover toss it in the trash.