How close can a light fixture be to a shower?

The 2020 National Electric Code (NEC) as explained by the Electric License Renewal website requires at least eight feet of space between the top of the tub or shower base and the bottom of the chandelier. This “no chandelier zone” also extends three feet outside of the tub or shower stall area.

How close can a light fixture be to a bathtub?

The National Electrical Code prohibits installing a hanging ceiling light fixture within 3′ horizontally of a tub unless there is 8′ or more in clearance from the bottom of the light fixture to the top of the tub.

Can you have a downlight above a shower?

With protect against low-pressure jets of water from the shower, IP65 recessed downlights can be used above shower cabins and bathtubs. The most popular IP65 waterproof downlights are: Poseidon (recessed), Amphitrite(recessed), Ariel(recessed) and Yuka (surface mounted) downlights.

Where should light be placed in shower?

It should be placed 75 to 80 inches above the floor and, like all vanity lighting, contain at least 150 watts — ideally spread over a fixture that’s at least 24 inches long so that the light will wash evenly over the hair and face.

Can you have a light fixture above a tub?

Mounting a hanging light fixture over the bathtub is one of the most popular and luxurious placements for a bathroom chandelier and with good reason. Relaxing into a hot bath with a glamorous chandelier glimmering above you is sure to make you feel pampered and posh!

Is it code to have a light in the shower?

National Electrical Code is pretty clear on this, at least as of the 2014 version. It says that if the fixture is above the tub or shower, and within 8 ft. vertically from the top of the bathtub rim or shower threshold, the fixture must be rated for damp locations.

How high does light fixture have to be above a tub?

8 feet

The National Electric Code for the U.S. says that hanging fixtures should be at least 8 feet above the top of the bathtub rim. If that’s not doable in your space, consider hanging the chandelier at the center of the room for a fancy bathroom that’s luxurious and still up to code.

Is it against code to have a chandelier over a bathtub?

After all, most chandeliers above bathtubs are a violation of national building code in the United States.

How big should a light fixture be over a tub?

Determine the size of the lighting fixture by taking one-third the length of the tub. For a chandelier that is centered in the room, mount it at least three feet away from the tub if room size allows. Also, use only wet or damp-rated fixtures in the bathroom.

How high should a light be above a bathroom mirror?

around 80 inches

For a single light above the mirror, place it around 80 inches from the floor for an ideal height. The bottom of the fixture or shade should be at least two inches above the top edge of your mirror. Look for fixtures that are slightly smaller than the width or height of your mirror for an ideal visual ratio.

How do you put a light above a shower?

Quote from the video:
Quote from Youtube video: So we're gonna add a third switch to control the new can light that's going to go up in the ceiling. There is no existing fixture. But we have this cool. Product. It is this halo what's upside-down is

Does a shower light need to be GFCI protected?

A. Master electrician Sean Kenney responds: The short answer is yes. Although the NEC does not require either the switch or the light fixture to be GFCI-protected, most lighting fixtures designed for use in a shower stall require GFCI protection to meet UL requirements.

Can you have a hanging light in the bathroom?

So the short answer is yes, pendant lights can be used in a bathroom as long as they’re not too close to water sources. Any lighting positioned close to a water source such the shower, bath or sink needs to use ‘ingress protection’ or IP rated fittings.

Can you put any ceiling light in a bathroom?

As long as you follow the correct safety procedures and make sure you install lights outside of the zones requiring IP rated fittings, you can use any lighting to make your bathroom as stylish as you like.

Can you use a dry rated light in a bathroom?

Dry-rated lights typically handle low levels of moisture in bathrooms nicely because ventilation prevents the accumulation of too much condensation. In short, unless you’re wiring fixtures in close proximity to your shower, you can use dry-rated lights for most bathroom locations.

Can LED lights be used in showers?

LED lights have drastically increased the lighting options available for wet environments like bathrooms and showers.

What rating does a shower light need?

Zone 1 is the area above the bath or shower to a height of 2.25m from the floor. In this zone a minimum rating of IP45 is required but it is generally accepted that IP65 is to be used. It’s also worth noting that most shower lights are rated at IP65 in any case.

Can you put LED strip lights in shower?

The HR-ALU LED Extrusion is used with flexible or hard LED strips that are 8-10mm wide (0.39”). Due to its high integrity and compact size, it is ideal for use in bathroom, shower, floor applications or areas exposed to water.

Can LED strip lights get wet?

LED strip lights are available uncoated (non-waterproof), or with splash-proof or fully waterproof coatings. With this range of waterproof LED lights, you can install your tape strips almost anywhere – bathrooms and kitchens, externally, or any location where resistance to water is required.

Can LED lights be near water?

They’re tightly sealed against water. These may be near a pool or in an area that receives rain or snowfall. The danger of an LED light being exposed to water is when it’s fully submerged. Electricity flows through the bulb, and because water is a conductor, it’s possible for electrocution to occur.