Why does my shower go hot when I turn another tap on?

Sometimes when someone uses another tap in your kitchen or laundry or even flushes the toilet, you may experience a loss of heating in your shower. This is due to the water supply from the hot water tank and the water pipes working together simultaneously. It is essential to know how your plumbing system works.

Why does my sink water get hot but not my shower?





What’s most likely happening is a problem with the shower’s mixing valve. The mixing valve is a control valve that creates the balance in the flow of water from the hot water line and the cold water line and blends the two together for your desired shower temperature.

Why is my shower only sometimes hot?

If you’re getting hot water everywhere but your shower, it could be that your anti-scald device is set at too high a limit. Anti-scald devices (also called a “hot limit stop” or “rotational limit stop”) are safety features that most faucets have.

How do I adjust my navien water heater?

Quote from the video:
Quote from Youtube video: If you want the temperature to Galore. And the up arrow if you want the temperature to go higher so as you can see I'll push the down arrow right there and it went to 114 degrees Fahrenheit.

How do I fix the water temperature in my shower?

Quote from the video:
Quote from Youtube video: So look at that little arm that little that little cutout right there and the more you adjust a counter clockwise harder it's gonna be pretty hot all right there.

How do you adjust an anti scald valve in a shower?





Quote from the video:
Quote from Youtube video: Basically we just pull this guy out shifter. Around and stick the teeth back in and carefully. To the sudden that we want. So we'll just go away there like that and that'll goes to the full.

How do I reset my Navien tankless water heater?

Locate the reset button on the heater’s front control panel. You can find it in the lowest corner opposite the on and off button. Press the reset button to reset your device.

What is DHW mode?

As the words entail; the heating system is used to provide heat to the building during cold weather. The domestic hot water system (DHW) is used to provide hot water for the kitchen and bathroom sinks, tubs and other appliances. The same boiler can provide both water systems as long as both water systems do not mix.

What is navien intelligent preheating?

Intelligent pre-heating: This is a self-learning process that is enabled by turning on another dip switch on the front panel. The unit software will monitor flow demands over a 7 day cycle and recirculate the following week based on the water usage. The unit continues to monitor and adjust as necessary.

Is navien a good tankless water heater?



The Navien water heaters are some of the greatest on the market today. Tankless water heaters provide a continuous supply of hot water, and they use about as much energy as a light bulb. Navien tankless gas water heaters are well-known for their reliability and efficiency.

How does the navien hot button work?

At the push of a button, the Navien HotButton activates the internal recirculation pump and gas fired burner to heat water in supply lines. This gives your customers hot water when they need it, saving water and money.

What does a navien buffer tank do?

NPE-Advanced



Navien ComfortFlow® is the first and only system that incorporates a built-in insulated buffer tank and recirculation pump. The buffer tank eliminates the “cold water sandwich” effect and issues of minimum flow rates commonly found in other tankless water heaters.

What does a buffer tank do in a tankless water heater?



electric water heater to a tankless model creates a buffer to eliminate the section of cold water left in the tankless heater’s heat exchanger. if located near the bathroom, the tank also can reduce the wait for hot water.

What is navien recirculation?

The NaviCirc recirculation valve works best if installed under the furthest accessible fixture away from the water heater. With the NPE-A unit’s built-in pump, water circulates through the NaviCirc to preheat the hot water lines, using the cold supply line as the return line back to the water heater.

What is the difference between Navien NPE A & NPE s?

The Navien NPE tankless water heater is available in two models, the S (Standard) and the A (Advanced). The difference between the two is the inclusion of a buffer tank and recirculation pump on the A model.

Which is better Rinnai vs navien?

Efficiency. Navien Water heaters have an advantage when it comes to being energy efficient. Navien units have UEF ratings of up to 0.96 while Rinnai Units max out at approximately 0.93. The more efficient the unit is, the less energy waste which translates to more energy savings.

What is the life expectancy of a tankless water heater?



15 to 20 years

One of the most common questions asked by consumers about tankless water heaters is how long they will last. A tankless water heater can last anywhere from 15 to 20 years with proper maintenance and operation. In comparison, a standard tank water heater normally has a working life of 10 years or less.