How do I turn a switch into a outlet combo?


Quote from Youtube video: So for that we're going to be using the flathead screwdriver. And take those screws. Out. After your light switch cover is off go ahead and grab your drill or screwdriver and remove the switch.

How do I change a single light switch to a double light switch?





How to Make a Double Light Switch From a Single Light Switch

  1. Ensure all power is off.
  2. Remove the old switch.
  3. Identify the switch wires.
  4. Disconnect the wires from old switch.
  5. Connect wires to new switch.


Can a single pole light switch control two lights?

The answer is yes; one switch can turn on multiple lights. You can use two ways to make your switch control multiple lights. The most common way is to daisy-chain the light fixtures through connecting them with each other and hooking the first fixture to the switch.

How do you wire a double pole switch to a single pole?

Use one screw in the ” On ” position and one screw in the ” Off ” position on the same side. Use the same clockwise wrapping technique as the ground wire to attach the black cables to the two screws. Which black wire goes on top or the bottom does not matter. Push all cables into the box and fold as they go.

Can light switches be converted to outlets?





No problem! However, suppose you want to keep the switch and the light fixture, but add an outlet underneath the switch. Again, that’s no problem, but you’ll have to purchase a switch outlet combo. It fits in the electrical box occupied by the switch and provides the functionality you want.

What is combination switch?

The combination switch is the electronic switch assembly that controls several vehicle functions. It is most commonly used to control the turn signals, the high and low beam headlights, and wipers. It is usually mounted on the left side of the steering column, where it is easily accessible to the driver.

How do you connect two lights to two switches from one power source?

Run 12-gauge electrical cable between each switch and the light it controls. Pull one end of each cable through the back of one of the light fixture electrical boxes. Strip both ends of each cable with a knife, separate the wires and remove 1/2 inch of insulation from the end of each.

How do I wire another light to an existing light and switch?

You can usually install a light fixture between an existing one and the switch by cutting the cable to the existing fixture at the location of the new one, inserting the ends of the cable into the electrical box for the new fixture and pigtailing the new fixture onto these wires.

Do I need a single pole or double pole light switch?



Single pole sockets are perfectly legal and are safe for many appliances, but it is safer to use double pole sockets. Therefore is always better to use double pole sockets in all situations.

Can I use single pole switch to 3-way?

You can actually achieve that functionality by converting a single-switched circuit to a 3-way switched circuit without too much work. 3-way switches allow you to control a circuit from two different locations, and they’re commonly used for lighting to conveniently turn the lights on and off from two different places.

How do I know if I need a single pole or double pole switch?

Both single pole and double pole switches can be either single or double throw. A pole refers to the number of separate circuits a switch can control, a single pole switch can operate one circuit whereas a double pole switch can control two circuits. A throw refers to how many positions can be activated by a switch.

What is a single pole switch used for?



A single pole switch is used to control the light in a small closet or bathroom. It’s called a single pole switch because there are two wires connected or separated by the switch mechanism. There’s also a ground wire to protect against electrical faults.

What is a single pole double throw switch used for?

A Single Pole Double Throw switch can serve a variety of functions in a circuit. It can serve as an on-off switch, depending on how the circuit is wired. Or it can serve to connect circuits to any 2 various paths that a circuit may need to function in.

What is a 2 pole single throw switch?

A Double Pole Single Throw (DPST) switch is a switch that has 2 inputs and 2 outputs; each input has 1 corresponding output. Each of the terminals of a double pole single switch can either be in the on position (closed) or in the off position (open).

What are the 4 types of switches?

The types of switches are classified into four types namely:

  • SPST (Single Pole Single throw)
  • SPDT (single pole double throw)
  • DPST (double pole, single throw)
  • DPDT (double pole double throw)



What is the difference between two way switch and single pole switch?

A one-way is also called a single-pole switch, while a two-way switch is also known as a two-pole switch. A one-way switch has a defined on and off position, while a two-way switch has no defined on and off position as it depends on the position of a two-way switch. A one-way switch is restricted to one location.

What are the 3 types of switches?

Types of Switches. There are three types of mechanical switches: linear, tactile, and clicky. They each have a distinct feel when pressed and are made for different kinds of users.