What if new kitchen sink drain doesn’t line up with existing pipes?

In general, if the P-trap doesn’t line up with the drain, you can adjust the length and height of your drainpipes by cutting them or simply slipping them in and out of their fittings.

How do you fix a disconnected sink pipe?





Put a bucket under the pipes to catch water then if any pipes are loose, try tightening the connection. Most plastic drain pipes can be tightened by hand and without tools. Run some water through the drain and wait and see if tightening stopped the leak.

How do you connect drain pipes under sink?


Quote from Youtube video: Into place take a nut with the threads facing down slide it up the tailpiece on the sink drain while holding the nut into place choose the proper size washer.

What to do when P-trap doesn’t line up?

Quote from the video:
Quote from Youtube video: So you have to cut that distance such that when you slide the p-trap up against it it will be there and perfectly level to go straight into the center of that pipe.

How do I connect plumbing to a new sink?

Quote from the video:
Quote from Youtube video: And if you can't move this pipe up then you're going to need to cut it somewhere. And then glue a small piece of pipe. Into this section and then use a rubber coupling to connect.

What is a trap adapter?





Quote from the video:
Quote from Youtube video: There are three pieces to it not a furl plastic furrow and you drop it after just a matter of putting it on there tightening it up and that's it.

How do I reconnect my kitchen pipe?

Quote from the video:
Quote from Youtube video: Using the correct cement is very important this is ABS tubing so ABS cement should be used PVC. And PVC – ABS connections have different cements. Apply a thin even coating to any part of the fitting.

How do I fix the drain pipe under my kitchen sink?

Quote from the video:
Quote from Youtube video: Cut my extension pipe to size and I'm going to slip it up I've got a nut in the washer above it. And we'll just snug that down and now I'm going to take my trap I've got a nut and a washer above. It.

How do you connect misaligned PVC pipe?

Quote from the video:
Quote from Youtube video: Area. Once it's good and warm I'm gonna gently test the pipe to see if it bends easily slowly Bend it the angle I want how many heat it a bit just to ensure it bends well.

Does P-trap have to be directly below sink drain?



You attach the p-trap directly to the drainage and manuever the p-traps exits into you existing drain. It is not ideal to have the p-trap below the the exit drain because water gravity has to force the water out instead of it flowing downwards naturally. They both work and have seen it many times.

Do all drains need a trap?

There are traps in every drain because any connection that leads to the drain system is also a possible outlet for sewer gas. Even your toilet has an internal trap shape to its porcelain configuration that serves exactly the same function.

What does as trap look like?

An “S” trap is named so because it looks like an “S” on its side – it basically consists of a normal trap, and then another trap installed right up against it in an upside-down fashion, as shown below.

What’s the difference between as trap and P-trap?



The only difference between a P-trap and an S-trap is the horizontal length of pipe on the outflow side which allows you to connect the vent. You can turn an S-trap into a P-trap by adding this pipe — it should be at least 4 inches long — and connecting a vent to it.

What does AP trap look like?

Quote from the video:
Quote from Youtube video: If you notice a lot of extra piping under your sink then you're looking at the p-trap. Key traps are named after their shape.

Where is P trap located?

The P-trap is the P-shaped section of pipe in the line that runs from the bottom of your sink to the wall. It’s shaped this way to trap sewer gasses and prevent them from coming out the sink as well as to catch debris that’s been washed down the sink, such as hair or food scraps.

How do you tell if P trap is working?

Quote from the video:
Quote from Youtube video: If you take the letter p flip it around and lay it down that's what you see right here there's a letter p. And that's why it's called that so the p trap has been around for a long time.

Why does it smell like sewer under my bathroom sink?



If the P-trap isn’t working properly, sewer gasses can make their way into the bathroom and cause your sink to stink. Your sink should also have a vent that gives backflowing gases somewhere to go. If the sewer smell in your sink is caused by a blocked air vent, you may need professional assistance.

Can you pour bleach down the drain?

Pour bleach into them



Bleach is a powerful, toxic substance that should be used carefully and properly, and pouring it down a drain is not a proper use. Bleach can react with other substances in your pipes, potentially release fumes, and further plug up the system.

How do I know if my P trap is dry?

Dry P Trap



A dried p trap will result in a sewer odor emitting from a sink that maybe hasn’t been used in a while. A p trap is designed to use water to block the sewer gases from leaking up the drain. If a sink’s p trap dies out this can result in a drain that smells bad.