How do you replace a mortise lock on a sliding glass door?

Quote from the video:
Quote from Youtube video: Now fasten your needle nose vise grips onto the latch hook with a snug. Fit then back out the two mounting screws on the door's edge and remove the lock body from the door.

Are all mortise locks same size?

There are two sizes of mortice locks: 21/2” and 3”. If you are installing a mortice lock to a door with a narrow frame, or any door for that matter, it’s very important to know what size lock you need. The size of the mortice lock refers to how far the keyhole will be from the edge of the door.

Can a sliding door lock be replaced?

Quote from the video:
Quote from Youtube video: This. See exactly what's going on you haven't put them back up here. The reason water replacing it is the handle is completely broken unfortunately. You can't get parts when it comes to just the outer

How do I replace my mortise lock?

Quote from the video:
Quote from Youtube video: Make sure the bolt is out and then use a pair of pliers to grip the bolt. And pull the lock from the door. Now compare the size and shape of the old lock with the replacement.

How do you fix a sliding door lock mechanism?

Quote from the video:
Quote from Youtube video: Okay and that means that the latch will go in there okay and that means that the door will lock so i'm gonna just loosen these two screws you don't need to remove. Them just loosen them enough.

Are mortise locks universal?

Are mortise door locks universal? Yes, a mortise lock set and mortise door lock is universal and can easily be used to replace most other lock sets, especially on an older door.

How do you measure a mortice door lock?

As shown below there are 2 main parts to a mortice lock these are the case and the forend.

  1. Backset. The backset is measured by placing a tape measure or ruler from the center of the keyhole to the forend of the mortice lock. …
  2. Case Width. …
  3. Case Height. …
  4. Forend Length. …
  5. Forend Width.

Are mortice locks a standard size?

The most common sizes here are 44mm (on a 64mm / 2.5″ lock case), and 56mm (on a 76mm / 3″ lock case).

How do you measure a mortice latch?

An easy way to choose which latch you need is to measure from the edge of your door to the centre of your door Stile. Choose the Backset which is closest to this measurement, and the handle will be as central as possible to the Stile on your door.

Can you replace a mortise lock with a regular lock?

Mortise locks can be replaced with standard cylinders. Mortise lock is the name given to the large, rectangular locks that fit into a slot, or “mortise” in the edge of the door. These locks were common at the turn of the twentieth century and are still in use today. The cylinder lock is the modern standard.

Does Kwikset make a mortise lock?


Is Schlage or Kwikset better?

Also in the non-forced entry category, there is no doubt Schlage is better. With a better, more precise manufacturing process and 2 additional security pins than the Kwikset deadbolt, Schlage locks are significantly harder to pick, bump or compromise in non-destructive ways.

Is Titan the same as Kwikset?

The Titan is a pin-tumbler lock made by Kwikset. It is a modified version of the Kwikset Classic that uses six pins instead of five, and has a slightly different key to accommodate this.

Is Kwikset Made in USA?

Kwikset currently has manufacturing facilities in Denison, Texas; Charlotte, North Carolina; and Mexicali, Mexico.

Are Baldwin and Kwikset the same company?

Baldwin and Kwikset are part of Hardware and Home Improvement (HHI), a major manufacturer and supplier of residential locksets, residential builders’ hardware and faucets with a portfolio of renowned brands, including Kwikset®, Weiser®, Baldwin®, National Hardware®, Stanley®, Pfister™ and EZSET®.

Who bought Kwikset?


ASSA ABLOY $4.3B Acquisition of Kwikset, Baldwin Creates Smart Door Lock Juggernaut. Access Control giant ASSA ABLOY announces it has signed a definitive agreement to acquire the Hardware and Home Improvement (HHI) division of Spectrum Brands (NYSE: SPB) for $4.3 billion on a cash and debt free basis.