Are concertina loft ladders safe?

All of our concertina loft ladders are manufactured to the highest standards to provide strength, rigidity, durability and safety. Furthermore, they are suitable for use in a wide range of commercial and residential applications.

How big does a loft hatch need to be for a loft ladder?





562mm x 726mm

The most common size of a loft hatch and the size needed to conform to building regulations is 562mm x 726mm. However, other common sizes include 450mm x 600mm, 600mm x 700mm and 700mm x 900mm.

What sizes do attic ladders come in?

Choose the right Attic ladder’s rough opening dimensions

  • Classic size 22.5 x 54 inches.
  • Medium size, 25.5 x 54 inches.
  • Large size, 30 x 60 inches.


How do you make a loft ladder for a tiny house?





Quote from the video:
Quote from Youtube video: To get the ladder flush with the floor. Just find the backside of the ladder just start from there and get your level. Make. Sure it's level and draw a line and then from there we'll cut that part.

How good are telescopic loft ladders?

They’re ideal for small, tight spaces



Telescopic loft ladders are praised for their space-saving properties. In fact, they require virtually no clearance space or storage space in your loft and also need minimal landing space.

What is a telescopic loft ladder?

The Telescopic Loft Ladder is ideal for small hatches with minimal storage space and easy to install and operate. This ladder features automatic locking system, extra wide treads and rubber feet for safety and protection to flooring.

How small can a loft hatch be?

Building regulations do not impose any restrictions on the size of a loft hatch. However, if the hatch will be used for personal access, we would recommend a minimum of 530mm on each side.

Is it illegal to not have a loft hatch?



It’s a legal requirement that there is roof access to any loft space in a building. In a building of three or more stories, there is also a legal requirement for the access hatch to be fire resistant for at least 30 minutes.

Are all loft hatches the same size?

Are Loft Hatches a Standard Size? Loft Hatches are available in varying sizes, however this is dependent on their manufacturing material. Plastic Loft Hatches are typically designed to fit a structural opening of 562mm (width) x 726mm (length) with there being no option for a made to measure size.

How do you make a rolling loft ladder?

Quote from the video:
Quote from Youtube video: First mark a spot eight inches down the edge. Use a combination square to draw a line from the mark to the mitered. End clamp the handrail. Down and cut the line with the jigsaw.

How do you build folding attic stairs?



Quote from the video:
Quote from Youtube video: I pre-drilled into the side rails. And secured the hinges using beefy two and a half inch long screws. We also found the angle which the side rails were going to sit in relation to the floor.

How do you make a sliding loft ladder?

Quote from the video:
Quote from Youtube video: So here's what I do I'm gonna fold this open like this I'm gonna go over to here where my first mark is and I mark 15 degrees. And then I slide to my next mark. And I'm all right 15 degrees and I'm

Which type of loft ladder is best?

Telescopic Sliding Loft Ladders



If you have height and storage space restrictions, then a telescopic loft ladder is a useful sliding alternative. This metal ladder type is durable and able to withstand tough usage with ease.

Are wooden loft ladders safe?

Wooden ladders are known for being strong, robust and reliable. If you choose to take heavy loads up to your attic, they can feel a lot safer, all certified loft ladders have a maximum load and timber ladders are often stronger than aluminium.

Is it easy to install loft ladders?



Installing a loft ladder would be a simple DIY task if it were at ground level – but it’s not. Before installing one yourself you need to consider your skills, your equipment and your experience. If you possess all of these, and the drive to install one yourself, then there is nothing to stop you.

How long does it take to fit a loft ladder?

around 2 – 3 hours

Although costs might vary depending on the material of the loft ladder, the average time for installation should be similar. For standard fittings, where no hatch adjustments are required, you can expect your tradesman to install a loft ladder in around 2 – 3 hours.

How do you secure a loft ladder?

Quote from the video:
Quote from Youtube video: You can screw the ladder to a joist or a board as well as the two hinges many ladders have guide rails at the top or a spring assisted pivot arm instead.

How do you make a ladder loft hatch?



Quote from the video:
Quote from Youtube video: So i didn't use an impact driver. Then i had to screw the loft hatch cover to the frame with the screws provided on the hinges. For the ladders. These came much longer than we needed. And they fold.

Can I fit a loft hatch?

Depending on the size of the opening into your loft that the hatch will fit into will really dictate this as most ready made hatches are made to set sizes. If your new opening is going to be a slightly odd size then a bespoke build solution may be the only route you can take.

Can you cut a joist for loft hatch?

Never cut a joist connected to a strut or hanger. Never cut through two adjacent joists. Never cut a strut, hanger, rafter, purlin, binder or collar.