Do you need to stain Ipe? No, you do not need to stain Ipe. However, if you want it to stay brown, red, and dark you will need to apply a U.V. Coating.
Can Ipe decking be stained?
Best to reapply the IPE stain before the wood turns gray. Depending on the exposure to the sun, you will need to reapply every 9-18 months. If you have any IPE Staining questions please ask below.
How do you prepare Ipe deck for staining?
Quote from Youtube video: We recommend applying the brightener with a garden sprayer or a mop Mesmer's wood and deck brightener removes tannin andross stains as well as balancing the pH of the wood. After about 10 to 15
How often should Ipe be restained?
every 12 months
It would be best to reseal your Ipe deck every 12 months as the boards can only absorb so much sealer during any one application.
How do you clean Ipe before staining?
How to Prep IPE for Stain
- Wet the surface and the surrounding area.
- Mix the Cleaner or Stripper according to the directions and apply with pump sprayer, scrub brush, or mop.
- Allow RAD to sit on surface for 10 minutes then perform a light pressure wash or scrub to remove dirt and graying from wood.
Is it OK to pressure wash Ipe?
Pressure Washing
Using a pressure washer isn’t recommended for regular cleaning of Ipe decking. Power washers use high pressure which can damage and roughen the surface of the wood. Use a shop vac to remove debris and dirt from between planks, a soft-bristle broom to sweep it off, or just a regular garden hose.
Do you need to sand Ipe before oiling?
If ever you skipped maintenance for a longer period of time and the wood has become grey, we recommend a good pressure wash (Saicos Wood Brightener works well). Let it dry for a day or two, then give it a light sanding to smooth and remove any remaining grey spots – and is ready to oil, very simple.
What is the best sealer for Ipe wood?
The Best Finish for an Ipe Deck
Advantage Lumber recommends Ipe Oil and WiseCoat, which are comparable products, although WiseCoat produces a slightly darker color. Penofin Oil Finish is another solvent-based penetrating oil finish designed for dense hardwoods, such as ipe.
Should you sand an Ipe deck?
You should use a 60 – 80 grit sandpaper on the main deck. The handrails can be sanded with a 80 – 100 grit sandpaper. Ensure proper cleaning and vacuuming of the newly sanded deck to enjoy a smooth finish. Avoid using higher grit because it may close wood pores and slow down the oil penetration process.
How do I refinish my Ipe deck?
Quote from the video:
Quote from Youtube video: Sanding is the next step in our refinishing. Process sanding will not only remove remaining contaminants cleaning doesn't quite eliminate it also exposes fresh new wood opens the grain.
How do you clean and restore an Ipe deck?
Quote from the video:
Quote from Youtube video: Um you could probably use something a simple wood detergent bare all-purpose wood cleaner i'll put an image over here uh but i think it's called all-purpose wood and deck cleaner. That's fine it's a
Should you stain Ipe wood?
No, you do not need to stain Ipe. However, if you want it to stay brown, red, and dark you will need to apply a U.V. Coating. We recommend for maintaining this color that you use Messemers U.V.
Should I oil my Ipe deck?
If you want your IPE decking to remain naturally brown, you should apply a layer of IPE oil every year. Otherwise, you can just leave it as it is and ensure that you clean it regularly. The best part about not using IPE oil on a wood decking is that the silver patina is not permanent.
How do you clean Ipe before sealing?
If the hardwood needs sanding, pass the orbital sander across all the boards while moving with the natural grain. After sanding, use the vacuum to remove dust and debris. Use the garden hose to rinse the boards clean. Let the IPE decking dry completely before applying the pre-sealer.
How long does it take for Ipe to turn GREY?
An experienced ipe deck builder told me to not sand ipe as you remove the layers of dead cells which absorb the sealer. That was why it turned grey in about 4-5 months. Also, lay the boards end grain curving downward to drain better and avoid “cupping” after rain.
What is the best way to clean Ipe wood?
Mix a ⅓ cup of bleach to a gallon of warm water. Be sure to rinse well after mopping. Cleaning with bleach is also a good way to remove pollen or algae that may collect seasonally. Your ipe deck can also be scrubbed with a brush with the bleach solution, or with a wood cleaner like Murphy’s oil soap.
