4 Easy Ways To Finish Tile Edges

  • Caulk the Edge. This is the easiest and most cost-effective solution. …
  • Rail Moldings. Coordinating tile moldings in natural stone and porcelain are usually readily available. …
  • Metal Edges. Metal edges are available in a wide array of styles and finishes. …
  • Create a Bullnose Edge.

What do you put on tile edges?

Caulking is the cheapest and easiest method for finishing tile edges. Caulk provides a waterproof seal and is recommended for tiles with edges that already have a finished appearance, such as mosaics, tumbled stone, glass and some porcelain tiles. Install and grout all the tile, including the edge pieces.

How do you choose tile edge trim?





The trim should be at or slightly lower than the edge of the tile once it is installed. For example a tile that is 3/8″ (10mm) thick should work with a 3/8″ trim. However tile thickness can vary so it is a good idea to check the height before final installation.

Do you need edging on tiles?

The only time tile trim may not be needed is when the tile meets flush against other surfaces like wall corners or floor edges. Continuous tile designs can also be used instead of installing tile trim (but the tile edges should be glazed to remove rough, sharp edges).

Can you put tile trim on after tiling?

Are you thinking about tackling a tiling project, but are struggling to figure out how to install tile edge trim after tiling? No worries! It’s a lot easier than you might think.

How do you finish tile edges without bullnose?

Use a Caulked Edge (No Transition)



Some tile types don’t offer a bullnose because a bullnose is not necessary. Glass tiles, tumbled stone varieties, and porcelain tiles have naturally finished edge. They do not need a separate edge piece to create a polished look. Simply install up to the edge and caulk.

What size tile trim should I use?





To select the correct depth of tile trim for your tile you should use a tile trim one size up from the depth of your tile. For example if your tile is 10mm think use a 12.5mm tile trim. This will allow for the adhesive needed to hold the trim and tile in place.

Do you put tile trim on before tiling?

When installing trim to floor tiles, you’ll want to ensure to place trim tiles on all your edges or to the edge where the tile meets another flooring material. Always plan the installation of your tile trim alongside your tiles as they need to be installed in conjunction with one another.

What is tile edging called?

Bullnose tile is recognizable because of its characteristic rounded edges. It’s viewed as an edge treatment or trim piece, and is often used to cover corners or frame the perimeter of a tile design. This eliminates sharper angles and unfinished tile sides from being visible on your floor or wall.

How do you hide exposed tile edges?

Quote from the video:
Quote from Youtube video: Done is found these strips that can be added to the edge of the tile to hide that cut edge or hide the end of the edge of the tile. And you can see there that this this once we move over to this side

How do you install tile edging strips?



Quote from the video:
Quote from Youtube video: First fit the tile trim into a bed of adhesive on the bottom of the window cutting to size with a suitable saw miter the corners for the tightest. Finish. Then measure cut and fix the tiles.

What is a Schluter edge?

Schluter ®-RONDEC is a finishing and edge-protection profile for tiled edges and outside corners of tiled surfaces. The reveal of the profile forms a symmetrically rounded corner along the surface edge.

Do you grout between tile and edge trim?

No matter how flush the fitting was when you initially did it, over time, it will erode and create room, becoming even more visually unappealing. So, when trimming, it is a good idea to use grout between tiles and trim. Having said that, there are also several trimming options you can go with.

Should there be a gap between tile and trim?



Any gap larger than ¼-inch is too large to be caulked. If you attempt to caulk a large gap between your baseboard and tile floor, it will result in an unprofessional look. Instead, install shoe molding on your baseboard to decrease this gap, then caulk it. Do not attempt to caulk a gap larger than ¼-inch.

Can you use caulk instead of grout between tiles?

Grout is only used to fill the joints between tiles, while caulk can seal seams in many spots—along baseboards and crown molding, on windows to stop leaks and drafts, and anywhere two construction materials meet, even on outdoor concrete.

Should you put silicone over grout?

Can You Put Silicone Over Cracked Grout? You can put silicone caulk over cracked grout as a temporary solution, though it’s not generally recommended. Silicone caulk will not hold well over the grout for an extended period of time, as it’s not meant to bond to it.

How do you caulk tile edges?

Quote from the video:
Quote from Youtube video: So you can wet your finger wet a tool. And then you're going to want to smooth. It right after you apply it as a rule of thumb. We like to remove the tape immediately.