Why is my furnace coming on every 10 minutes?
Bad Thermostat: If your thermostat has a problem, it can cause your furnace to run cycles that are either too long or too short. If the thermostat is sensing the incorrect temperature and not sending a cut-off signal soon enough, or if the battery is dying, your thermostat can cause your furnace to run erratically.
Why does my furnace keep shutting off after a few minutes?
If your furnace keeps shutting off, it could be due to low airflow. There are several indirect issues that cause low airflow. Dirty Air Filters. If you don’t change your air filters often enough, the filters will become dirty and clogged, which means the heat exchanger retains heat and eventually causes it to overheat.
Why does my furnace only run for 15 minutes?
When you get the message “Nest noticed that your furnace shuts down within 15 minutes of heating,” that means your furnace is short cycling. Short cycling is when the furnace switches on for a short period of time then switches off.
Why does my furnace keep short cycling?
A dirty air filter is the most common cause of short-cycling. If your air filter is clogged with dirt, it won’t allow proper air flow to the heat exchanger. That can cause the furnace to overheat and forces the high limit switch to ride to the rescue by shutting the furnace off.
Can a bad thermostat cause a furnace to short cycle?
Thermostat Troubles Can Cause Short Cycling
Your furnace or central air conditioner spends a good amount of energy simply turning on and off, which is why you want yours to run for at least 15 minutes at a time before shutting off.
Why does my furnace run every 5 minutes?
Losing too much heat through the roof, windows, or doorways will cause your furnace to run more often. High ceilings and single-pane windows are common culprits. If your furnace only turns on for a few minutes at a time, but your home never warms up, it’s probably short cycling.
Why does my furnace turns off before reaching temperature?
A lack of airflow can cause your furnace to stop heating before reaching the set temperature. Ensure there is nothing impeding airflow around your furnace, within your furnace and through your ducts. Check that registers are open, no ducts are damaged or crushed and replace your furnace filter.
What can cause the blower to come back on for a short time after cycling off?
Also look for something blocking airflow. When the fan cycles back on while the burner remains off we figure that the heat exchanger is still so hot that even without the burner being on, the air in the plenum heats back up after the fan cuts off, causing the switch to turn the fan back on.
How do I stop short cycling?
How To Stop and Prevent Short-Cycling
- Check your air filter. Believe it or not, a clogged air filter can cause a wide variety of air conditioning issues. …
- Check your thermostat placement. …
- Check your air conditioner’s refrigerant levels. …
- Replace the low-pressure control switch. …
- Check the compressor.
How do you diagnose a short cycle furnace?
How to Tell if Your Furnace is Short-Cycling & What to Do
- It’s overheating.
- Having a bad flame sensor.
- Your furnace filter is dirty.
- Blocked heat grates.
- Blocked exhaust vent.
- Your thermostat mounted in the wrong location.
- The furnace that is too big for your home.
Is short cycling an emergency?
Sure, short-cycling is a warning of a problem–like a refrigerant leak. But the real problem is what short-cycling does to your cooling system. It shortens the system’s service life, increases repair needs, causes and increase in energy use and a decline in home comfort.
