Use a 3/8″ left-hand drill bit. The drill bit is long enough to clear the handle and has a small enough OD that it won’t damage the threads in the setscrew hole.
…
- Drill it out. …
- Drill and try an extractor. …
- Once your pretty sure that it’s not holding the handle on, you may need additional persuasion to get the handle off.
How do you get a stripped screw out of a shower faucet?
- Place the rubber band out across the stripped Phillip’s screw. You can even use a hammer to tap your screwdriver into the screw head further for extra grip, make sure to not break the rubber band.
- Turn the screw slowly until you feel movement and can release the stripped screw.
- Choose the screw extractor that coincides with the size of your screw head. …
- Insert the drill bit into a power drill. …
- Position the screw extractor in the drilled hole. …
- Fit an adjustable wrench to the top of the screw extractor.
- Step 1: Turn off water supply.
- Step 2: Unscrew set screw.
- Step 3: Remove handle from valve.
- If handle is corroded: Add plumber’s lubricant.
- Step 4: Remove trim plate.
- Step 5: Wrap faucet stem with Teflon tape.
- Step 6: Screw handle in place.
- Step 7: Replace trim plate.
How do you remove shower handle if set screw is stuck?
Spray a penetrating lubricant on the set screw, especially in the seam between the set screw and the base of the object. Allow the penetrating fluid to work for one hour, then wipe the set screw head with a clean cloth.
How do you get a corroded screw out of a shower?
Drill just down through the center of the screw’s head. Use the drill to push the screw extractor into the hole. Then, turn the screw extractor using an adjustable wrench in the counterclockwise direction. The screw should loosen and release, and then you are good to go on the rest of your project.
How do you get a stripped hex screw out of a faucet?
To remove a stripped set screw, place a rubber band over the stripped screw to create a grip. Then, place a flathead screwdriver over the rubber band and turn counterclockwise to remove the screw.
How do you get a stripped screw out of a bathtub faucet?
How to Remove a Stripped Screw From a Faucet
How do you remove shower handle handles?
How to Replace a Shower Handle
How do you remove a stripped Allen grub screw?
Turn the grub screw clockwise slightly with either an Allen wrench or flat-head screwdriver, depending on the screw. When the screw moves, turn the screw counterclockwise to remove it from the part. The movement clockwise, as if tightening, sometimes breaks the seal any rust may have on the screw.
