Why does my light stay on when switch is off?

The most likely error is that the wire going to the light that stays on is contacting one of the live wires. To check, disconnect all the wires from each other, turn on the breaker and use a voltage tester to identify the live circuit wire.

Why is my ceiling fan light not turning off?





When the switch won’t turn the ceiling fan off, or even when the ceiling fan light won’t turn off, the first thing to do is to try and turn the fan off any other way. In most cases, this means using the pull chain. Many fans also have a pull chain dedicated to the lights only, so you should check that one as well.

How do you fix a light switch that won’t turn off?

1 Answer

  1. Turn the power off at the circuit breaker.
  2. Remove the switch cover.
  3. Take a picture of how the wires connect to the switch.
  4. Remove the old switch.
  5. Replace with the same type of switch, matching wires.
  6. Put cover back on.
  7. Turn power back on.


How do I turn off my ceiling fan with the light on?

It’s very likely that lamp and fan are jumpered together. To disable the fan entirely you can then simply remove the jumper and connect the switched live to only the lamp. To fix it properly you can remove the jumper and connect a separate switched live wire from the second switch to the fan.

Is it normal for LED lights to glow when off?





So, essentially, if your LED bulb is giving off a dim light even when it’s turned off, this isn’t an indication that there’s something wrong with the bulb but rather that your lighting fixture still has a slight electrical current going through it even when it’s off.

Can a light switch cause a fire?

Question: How does a light switch cause fire? Answer: The terminals can very slowly loosen, causing resistance at the point of connection. This causes heat, which can start a fire. Connections internal to the switch can also degrade over time, doing the same thing.

How do you test a ceiling fan light switch?

Quote from the video:
Quote from Youtube video: All right over here if you want to verify. You should have a 120 volts AC. Between. This blue wire coming in which turns to red and then your white connector right here.

Do ceiling fans have a reset button?

There are several ways to reset a ceiling fan remote, but here’s the most straightforward: With the power off, hold down the button until the light on the remote flashes. Then, press and hold it again for 15-30 seconds to resynchronize the remote with your fan.

What is the switch on the ceiling fan for?



A ceiling fan direction switch or control adjusts the spin direction of a ceiling fan – clockwise or counterclockwise. Nearly all modern ceiling fans can be adjusted to rotate in the direction of your choice.

Can one switch control fan and light?

With single-switch wiring, power to the fan is controlled by a standard single-pole wall switch, like a regular light switch. The fan has power when the switch is on, while the fan speed and the light (if the fan has one) are controlled by pull chains on the fan itself or by a remote-control device.

How do you manually turn off a ceiling fan?

Assuming that you have already exhausted other options (e.g., using the remote or wall switch), turning off the ceiling fan without its pull chain means cutting its power draw from its connected circuit breaker. Go to your home’s fuse box and shut off the switch connected to the ceiling fan.

How do you turn off a Hampton Bay ceiling fan?



Use the high, medium and low buttons on the remote to adjust the Hampton Bay fan speed. You can use the light button to dim the light and the off button to turn off the fan.

How do you fix ghosting LED lights?

3 options here:

  1. Change the LEDs to an approved product- may not solve the problem.
  2. Change dimmer to the PD-6ANS- most likely would solve or at least reduce the “ghosting” you are experiencing.
  3. Try the LUT-MLC- lots of posts on this, Lutron reluctantly has mentioned the MLC with dimming now.


What causes LED ghosting?

What causes LED bulb ghosting? In most cases, when you turn a standard dimmer off, the electronics inside do not receive any power. Caseta wireless digital smart dimmers still need to receive a small amount of power to be able to receive RF signals. This tiny bit of current can cause this bulb ghosting phenomenon.

What can go wrong with LED lights?



Most Common Problems with LED Lights

  • Using the wrong current.
  • LED bulbs overheat.
  • Low quality solder and wire bonds.
  • Improper use of LED lighting.
  • Issues with color rendering.
  • Existing fittings and fixtures are incomparable.
  • Light Emitting Efficacy.
  • Overly complicated circuits.

Why do LED bulbs fail so quickly?

Unlike incandescent light bulbs, LEDs don’t produce light using heat. This is part of what makes them so energy efficient. The downside is that their components can be sensitive to overheating, which can cause them to burn out prematurely.

When Should LED bulbs be replaced?

Most LED bulbs boast a lifespan of up to 50,000 hours, which means that you may not have to splash out on LED replacement bulbs for up to 10 years after your original purchase. Incandescent bulbs and halogen bulbs will probably only last for 1000 – 2000 hours, compared to up to 100,000 hours for dimmable LEDs.

How do I know if my LED lights are bad?

If you want to know what more problems can LED lights cause, then read along.

  1. LED Light Flickering.
  2. LED Buzzing or Humming Noise.
  3. Too Bright light.
  4. LED Light Too Dim.
  5. LED Light Stopped Working.
  6. LED Flashes on and then Goes off.
  7. LED Dimming Does not work.
  8. LED Strip Showing the Wrong Color.

Are cheap LED bulbs bad?



Yes, they really ARE worth it. As you can see, there are many factors that make up the quality of LED lights, and can impact both the short and long term costs. A higher initial investment for quality LED’s can save actually save more in the long run that using so-called “cheap” LED’s.

How long do LED lights last?

One of the biggest advantages of LED light fixtures, is their extended lifespan. While incandescent light bulbs were built to last around 1,000 hours, the most enduring LED light fixtures have been tested to last as long as 100,000 hours. On average LED light bulbs will not have to be changed for at least 20 years.