Why does my light switch have 2 black wires?
STEP 3: Identify the terminal and ground wires.
Observe the layout of the wires. You should see two black wires, each connecting to a different screw on the side of the switch. These are called terminal screws. You will also see two white (neutral) wires that connect to one another in the box.
Can you have 2 black wires together?
This is the typical way to connect a switch. The 2 blacks connected are “power in, power out” to the next switch in the circuit. The pig-tail to the dimmer connected to the two blacks is also typical.
Can you put two wires on the same terminal?
Never connect more than one wire under a single screw terminal. It’s also not a good idea to direct-wire all three cables to the receptacle by utilizing both the screw terminals and the push-in terminals on the back of the device.
How do you pigtail two black wires?
Quote from the video:
Quote from Youtube video: About 3/4 of an inch on both sides of both pieces of wire and this is going to be our pigtail.
Which wire is hot if both are black?
Here’s a rundown of electrical wires: The black wire is the “hot” wire, it carries the electricity from the breaker panel into the switch or light source. The white wire is the “neutral” wire, it takes any unused electricity and current and sends it back to the breaker panel.
Which wire is hot when both are same color?
In most modern fixtures the neutral wire will be white and the hot wire is red or black. In some types of fixtures, both wires will be the same color. In this case, the neutral wire is always identified by some means. In some cases, there will be small writing on the wiring case.
What happens if you connect 2 hot wires?
Two hots of same circuit – nothing should happen.
What happens if you wire light switch wrong?
But here’s the catch: If you connect the circuit wires to the wrong terminals on an outlet, the outlet will still work, but the polarity will be backward. When this happens, a lamp, for example, will have its bulb socket sleeve energized rather than the little tab inside the socket.
What happens if you mix up hot and neutral wires?
This happens when the hot and neutral wires get flipped around at an outlet, or upstream from an outlet. Reversed polarity creates a potential shock hazard, but it’s usually an easy repair. Any $5 electrical tester will alert you to this condition, assuming you have a properly grounded three-prong outlet.
Does it matter what wire goes where on a light switch?
In the case of a single-pole switch, these wires are interchangeable—it doesn’t make any difference which wire is attached to which screw terminal. Inside the switch is a metal pathway that closes when the switch is in the ON position and opens to interrupt the flow of power when the switch is turned OFF.
How do you know which wire is hot on a light switch?
Quote from the video:
Quote from Youtube video: We're gonna put our black probe on that middle wire and then we're gonna touch the red probe. To one of the wires. Now the wire if it gives voltage that's the hot wire.
How do you tell which wire is hot and which is load?
Quote from the video:
Quote from Youtube video: And then remember gold goes to the hot. Side so the gold terminal. And that's on my line. Set and then silver goes to neutral or the white wire.
Which black wire is the load?
Load Wire – Generally connected to the top half of your switch. If the wire is coming from the top of the switch box, it is likely your load wire. Line Wire – Generally connected to the bottom half of your switch. In some cases, line wires are marked with “line”, “pwr”, or a lightning bolt symbol.
Is black wire a load or line?
So, what color is the load wire? Load wires are mostly black, but red can also be used as a secondary load wire. They are also connected to the switch’s top half, while line wires are connected to the switch’s bottom half.
How can you tell which wire is positive and negative when black?
If the multi-colored wire is black and red, the black wire is the negative wire, while the red one is positive. If both wires are black but one has a white stripe, the striped wire is negative, while the plain black wire is positive.
