Can you put 2 dimmers in box?

Dual dimmer switches can control two separate lights or a fan and light combination. A dimmer switch for a fan must conform to power load rating specified by the manufacturer. Lutron Electronics makes dual dimmer switches that fit inside a single box. … Enjoy the convenience of operating two dimmers from the same box.

Can you have 2 dimmers on the same circuit?





You can only have one dimmer per group. You can put the dimmer at either location, but not both locations. There are “companion” dimmers available from some companies, that allow you to place additional dimmers in the circuit.

Can you have 2 dimmers on a 2 way switch?

If you have a 2-way circuit (where the same lights are controlled by two switches) you must choose a push-on/push-off dimmer and replace one of the switches with that dimmer. You can only use one push-on/push-off dimmer in a 2-way circuit.

How do you wire two dimmer switches together?

Quote from the video:
You'll also have a bare copper ground wire connect the ground wire to the green ground on the dimmer switch by twisting the two together and screwing on a wire nut.

Do both switches need to be 3 way dimmer?

You will need a three-way dimmer and a three-way switch. This lets you dim from one location and turn the lights on and off from another. If only one switch controls the light, purchase a single-pole dimmer. If two switches control a single light or a group of lights, you will need a three-way dimmer.

Can you have two dimmers on a 3 way circuit?





The answer is no. If you set up a 3-way switch for your light, there can’t be multiple dimmers. However, there are workarounds to this. Such as placing one dimmer on the line leading into the first switch.

What is a companion dimmer switch?

The Maestro companion dimmer switch is designed to compliment a Maestro switch or a 6A or 8A Maestro wireless multi-location switch. The easy-to-operate tap switch turns lights on and off to your favorite light level or tap twice for full on. Press, hold and release the switch for delayed fade-to-off.

Can you have 2 dimmers on a 4 way switch?

Correct, no 4 way dimmers. The 3 way must be at either end of the switch legs, whatever it takes. If the dimmer is desired in a location where only a 4 way switch makes sense, the only solution is to extend the power and double back the switch legs so that it becomes the “end”.

How many lights can one dimmer switch control?

A good rule of thumb is to allow 100W for each LED fixture so in this case, the 600W dimmer can handle only six LED fixtures. If you are meeting all of the electrical requirements of the dimmer and you are still having flicker issues, you can try adjusting the low-end trim.

How do I install two dimmer switches?



Quote from the video:
With one at the top and one at the bottom you're going to need a 3-way dimmer switch. So look for the three-way icon on the packaging.

Can you install a dimmer switch on a light with two switches?

With a standard single-pole dimmer, a single switch controls the light. With a three-way dimmer, you can control a light with two switches. You will need a three-way dimmer and a three-way switch. This lets you dim from one location and turn the lights on and off from another.

How do you install a 2 gang dimmer switch?

Quote from the video:
Next remove the l1 wire from the old switch. And attach to the l1 terminal in the new switch. And finally if there's an l2 wire present for two ways switching.

Can you have 2 dimmers on a 4 way switch?



Correct, no 4 way dimmers. The 3 way must be at either end of the switch legs, whatever it takes. If the dimmer is desired in a location where only a 4 way switch makes sense, the only solution is to extend the power and double back the switch legs so that it becomes the “end”.

Can you have 2 dimmers on a 2 way switch?

If you have a 2-way circuit (where the same lights are controlled by two switches) you must choose a push-on/push-off dimmer and replace one of the switches with that dimmer. You can only use one push-on/push-off dimmer in a 2-way circuit.

What is a companion dimmer switch?

The Maestro companion dimmer switch is designed to compliment a Maestro switch or a 6A or 8A Maestro wireless multi-location switch. The easy-to-operate tap switch turns lights on and off to your favorite light level or tap twice for full on. Press, hold and release the switch for delayed fade-to-off.

Do you need two dimmer switches?

If you’re using a normal 3-way dimmer, you can have only one dimmer. The switch at the other end must be a 3-way switch. You would be able to turn the light on/off from either location. However, you’d only be able to control the intensity of the light from one place.

How do you wire two dimmer switches in the same box?



How to Wire Two Dimmer Switches in the Same Box

  1. Choose a dual dimmer control style. …
  2. Cut off the power supply running through the circuit that feeds the box. …
  3. Remove the existing switch. …
  4. Identify and mark the hot wire. …
  5. Unscrew the terminals and remove the wires from the old switch. …
  6. Install the wires on the dual switch.

Can a light be dimmed from 2 locations?

If you want to dim a light from one switch location, you just simply install your dimmer, but if you want to dim your light from more than one switch location, you just pair the dimmer switch with an accessory dimmer or a companion dimmer (manufactures uses different names for these “extra” dimmers).