The way to remove it is to grind a notch with a dremel tool in the top of the set screw, and then use a flat head screwdriver to back out the set screw. It is very possible that you damaged the threads of your hose fitting by trying to unscrew this device without removing the set screw.
How do you get a hose off that won’t come off?
The first thing to do is try using a wrench or pliers. First, spray some WD-40 or other lubricant into the threads and let it sit. Then, use the wrench or pliers to try to loosen the hose. If that doesn’t work, don’t fear.
How do you unscrew a calcified hose?
Quote from the video:
Quote from Youtube video: Off that's calcified or been there forever. You can try pliers but and when you do definitely grip on. Definitely grip on to the the hose bib. And try and crank.
How do you remove a cross threaded hose?
The way to remove it is to grind a notch with a dremel tool in the top of the set screw, and then use a flat head screwdriver to back out the set screw. It is very possible that you damaged the threads of your hose fitting by trying to unscrew this device without removing the set screw.
How do you get a stuck garden hose out of a spigot?
Heat the spigot joint with a hair dryer or heat gun if the hose still will not come loose. Heating the metal will cause it to expand, loosening the hose. Reattach the locking pliers after heating the metal, and use them to unscrew the hose.
How do you remove a corroded washer hose?
Try some WD-40 and spray the rusted area well. Then wrap an old rag around the water faucet and use a pipe wrench and see if you can loosen the old hose. Or use any aerosol penetrate available at any automotive or hardware store. Spray on and let the product sit while it does its job.
How do you separate two garden hoses stuck together?
Heat water to boiling and pour it over the outer ring on the stuck hoses. The hot water should expand the metal of the outer ring enough to loosen the hose ends. Grasp the newly expanded hose ends with pipe wrenches and loosen gently.
