How do I identify my shower parts?

Check behind the shower handle at the center of the trim plate to find the manufacturer’s symbol or brand name. “K” is for Kohler, “M” for Moen while Price Pfister, Delta, and American Standard have their full names on the faucet. You can also use the cartridge length to find the brand name.

What are the parts of a shower faucet called?

Shower Trim Plate — A trim plate is a decorative piece of brass that covers the rough in valve in tub/shower installations. Showerhead — An output devise that delivers water to the shower. The valve controls the flow. Single Hole Faucet — As the name implies, these faucets require a single hole for installation.

How do I identify my faucet parts?

The most obvious and quickest solution is to look for a logo — the manufacturer’s symbol — that identifies its faucets. Each manufacturer has a distinctive logo that sometimes appears on the escutcheon — the plate beneath the faucet — the body of the faucet, the spout itself or somewhere on the handle.

How do I identify my shower valve?

Count the Number of Shower Faucet Handles

Often, the type of shower faucet and handle(s) will indicate what kind of shower valve is behind it. Zero handles may imply a shower panel faucet with buttons to control water flow and temperature.

How do I find my shower faucet manufacturer?

Quote from the video:
Quote from Youtube video: Itself usually there's a mark on it some indication as to who the manufacturer is it could be either the name of the manufacturer. Or it could be a logo. If you can't see it easily.

Can you mix and match shower parts?

Shower Trim

You can coordinate the same style and finish across all components, trim and fittings, as well as faucets and accessories, or you can mix and match.

What are the shower parts?

Shower Parts Explained – Names and Full Diagram

  • 2.1 Showerhead.
  • 2.2 Shower Pan.
  • 2.3 Shower Valve. 2.3.1 Pressure-balancing Shower Valve. 2.3.2 Thermostatic Shower Valve.
  • 2.4 Water Supply Pipe.
  • 2.5 Enclosure.
  • 2.6 Shower Strainer / Shower Drain. 2.6.1 Drain Cover. 2.6.2 Drain P-trap. …
  • 2.7 Shower Cartridge.
  • 2.8 Shut-off Valves.

What is the part of the shower that comes out of the wall?

shower arm

To confirm the terminology, a shower arm is the short length of the pipe that comes out of the wall and connects to the showerhead. Shower arms typically have a slight bend near their middle, and they almost always have threads on both ends.

What is a shower assembly?

A shower valve assembly is a plumbing device used to control the operation of a bathroom shower. This device regulates the flow, pressure and temperature of the water as it exits the shower head.

What are the different types of shower valves?

In a nutshell, there are three different types of shower valves on the market: pressure balancing shower valve, thermostatic shower valve and diverter shower valve.

How do you remove a shower valve?

If your shower valve uses a retainer nut to hold it in position remove with a wrench and place aside. Remove the valve. Hold the end of the valve cartridge with pliers and pull the valve from the wall, wiggle to loosen if necessary.

Are shower valve cartridges universal?

Cartridges aren’t interchangeable among different faucets, so if you decide you need a replacement, you need to know its part number so you can order it from your plumbing supplier or online. That number is usually available on the manufacturer’s website in the online version of the owner’s manual for your faucet.

Can I replace my shower faucet with any brand?

MongoCT. Showerhead threading is pretty much universal, you can swap one for most any other. Shower valve trim kits are the exact opposite…you may have luck by staying within a certain manufacturer, but for the most part trying to swap a trim kit onto an existing valve may or may not work.

Can you change shower fixtures without changing valve?

Simply replace the visible trim for an brand new appearance

Change out tub/shower control handles and spouts to achieve a brand new look, without redoing the valve plumbing. Use a simple replacement kit.

How do I know what shower cartridge to buy?

Use a caliper or ruler and measure the cartridge. Do this by measuring from the base to the tip (from seat to splines). Pay attention to the length tier of your cartridge (Lengths range from 1–12). Next, identify the broach pattern with the broach chart (see page B-5).

How do I know if my shower cartridge is bad?

There are a few ways to tell if your shower cartridge has gone bad:

  1. Dripping or running water when you turn your shower off (most common)
  2. Difficulty turning the shower handle, which worsens over time.
  3. Shower handle gets stuck or “slips” and doesn’t turn on the water.

How do you remove a shower cartridge?

How to do it

  1. removing handle from faucet. Remove Handle. …
  2. removing retaining clip. Remove Retaining Clip. …
  3. remove cartridge with wrench. Remove Cartridge. …
  4. replacing o-rings on cartridge. Replace O-Rings. …
  5. installing new cartridge. Install New Cartridge.

Is a shower valve the same as a cartridge?

A cartridge represents one type of shower valve system, whereas a diverter blocks water from exiting the tub spout and sends it to the showerhead instead. Some shower faucets use cartridges that can also divert water.

Where is the shower valve located?

You can see the trim on the shower faucet, but the actual valve is behind the wall and is permanently connected to the plumbing. To replace it, you need an access panel through the shower wall, and if it isn’t designed into your bathroom, you’ll have to cut one.